1996 Suzuki Swift Logo

Related Topics:

A
Anonymous Posted on Feb 05, 2014

Replace throttle cable on 94 Suzuki swift

I think my throttle cable froze and broke

5 Related Answers

Anonymous

  • 314 Answers
  • Posted on Oct 26, 2008

SOURCE: Replacing wheel bearings on suzuki swift

Front or rear?? Big diff! Frankster016

Ad

Anonymous

  • 2 Answers
  • Posted on Jan 18, 2009

SOURCE: need to replace 1995 suzuki swift fuel pump relay.

in the engine bay above the battery from memory is the fuse box for the main fuses & relays they should be marked on top of case one is for the fule pump.

alicantecoli

Colin Stickland

  • 22516 Answers
  • Posted on Mar 08, 2009

SOURCE: engine temp goes above 100c and fan does not come

look for and change the thermo switch ,it should be in the radiator

Anonymous

  • 58 Answers
  • Posted on May 30, 2009

SOURCE: my key broke in the ignition of my 1992 suzuki swift

needle nose pliers or a realy strong magnet.

Anonymous

  • 102 Answers
  • Posted on Sep 21, 2009

SOURCE: 2001 suzuki swift - thermostat replace?

Suzuki thermostats, more often than not, tend to fail OPEN when they have been overheated - which is a good thing! If they failed shut, you would really cook the motor. Change the thermostat. Also, find the cause of the initial lack of coolant.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to correct fault code 1y031n on 07 swift?

1994
how did you get this code
and why does it look so odd.?
most 94 cars are not OBD2 codes
and are oBD1, and are flash codes.
where id you see this code,
on the dash
in a scan tool ? (name it)
or where?
and what engine?>
what transmission.?
94 swift is a body that options are applied.
just a body.

why not RTM, read the manual the FSM
its there.

https://suzukipitstopplus.com/Products/1114-1994-swift-service-manual.aspx

0helpful
1answer

Swift clutch cable broke

Yes it is more than likely the clutch cable, a 30 minute job to replace.
0helpful
1answer

Gear Changing on Suzuki Swift.

this seams a common fault with the accelerater cable sticking eather spray cable with lubricant or replace with new hope this helps to solve your problem as we arnt all raceing drivers lol
0helpful
1answer
3helpful
2answers

Electrical manual swift 1.0

Look @ teamswift.net, You may be able to down load a PDF for it
0helpful
1answer

Problems after installing an imobolizer in my 94 swift gti

the wires you would of cut must be rejoined the same way red to red black to black retrace your steps
2helpful
1answer

Engine temp goes above 100c and fan does not come

look for and change the thermo switch ,it should be in the radiator
0helpful
1answer

Suzuki Swift Revs too high

change the throttle,grease the acceleration parts
0helpful
1answer

Reassembling gearbox 1995 suzuki swift

Hi,i have a problemh with gare box for my suzuki swift 1996.reg no is p476kov,when i change the gare from first in to the second makes a loud noise,could you help me and advice me how to solve this problem,and if the gare box is broke can u give an estimate price,thanks
0helpful
1answer

2000 Suzuki Swift Clutch Question

A clutch cable doesn't take much to install. Who told you $600.00?? You don't have to take the trans. loose to do this. All you do is unhook the cable from pedal and unhook if from the trans. This job should only take you an hour if you've never done it before. How long has the clutch been in your car?
Not finding what you are looking for?

66 views

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...