That a bad whell sensor that start to actup get the car pass on a scanner to identified the bad sensor
SOURCE: abs light emergency light stay on
Had a similar problem. Check the ABS wheel sensors and wirring to them. I had that problem when i tempered with my hubs
SOURCE: abs brake warning light comes on and rear brakes remain stuck on
I would bypass abs contraption with new line.(87 dually) abs located under drivers side cab looks very susceptible and is known to fail.I would trust my foot before that old thing.Im rippin it out of my truck & replacing it with new line all the way back.Old lines rusted pretty bad.Better safe than sorry.unplug light bulb or just leave it in .Jersey cant say anything if its 94 or older at inspection.that goes for all the lights.For me,older is better.I dont know what setup you have or if you sold it, you could try replacing it for about 160 at advanced.I hope its not the computer screwin up,thats probably a dealer item.Try unpluging hydraulic unit for shits & giggles.Go over rear brakes again before you start cutting.
SOURCE: Air Bag Light, Brake Light, & ABS Light came on in the dashboard.
Check and see if your alternator is charging
Low voltage will cause those lights to come on, as the computer is shutting down.
To check your alternator you will need a volt meter... WITH the engine running you should have about 14 volts coming out. IF NOT you need to replace the Alternator!
SOURCE: 2007 ford edge, three lights are on: ABS, wrench
it sound like a ABS-sensor is sticking are its bad give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man.
SOURCE: ford puma abs and traction warning lights
The first thing i would do is check the wiring on all four wheels.It could be a faulty solenoid.The next thing is a diagnostic check.
1,561 views
Usually answered in minutes!
×