Initially, the problem was going uphill. However, even in the flats. When I shift into a higher gear I have little to no power. I'm shifting in the normal RPM range. If I try to mash the accelerator, the engine revs but doesn't transfer power to the wheels.
Could this be the clutch?
Sorry,
That is tell-tale signs of your clutch going out..almost gone. Be sure to replace your clutch plate, pressure plate, have the flywheel turned by a machine shop and replace the throw-out bearing and the master/slave cylinder or it will need to be fixed again way too soon. Only other thing I can think of is if it has a cable controlled clutch (not likely) these type need to be adjusted from time to time as the cable stretches.
Sorry,
That is tell-tale signs of your clutch going out..almost gone. Be sure to replace your clutch plate, pressure plate, have the flywheel turned by a machine shop and replace the throw-out bearing and the master/slave cylinder or it will need to be fixed again way too soon. Only other thing I can think of is if it has a cable controlled clutch (not likely) these type need to be adjusted from time to time as the cable stretches.
×
457 views
Usually answered in minutes!
×