Shift points high

Chevy automatic transmission workings (Bob Hale) - Yarchive

yarchive.net/car/transmission.html

When a sufficiently high RPM is reached then the weights hit stops and do ... There are two shift valve assemblies, one for the 1-2 shift and the other for the 2-3 shift. .... Thehigh RPM factory governor appears to have about 1/3 less metal in the ...

Possible Transmission Issue - weird shift points/high RPMs ...

thespeedfreaks.net > Jeep Talk/Tech > Tech Questions

Oct 2, 2012 - Thread: Possible Transmission Issue - weird shift points/high RPMs ... throttle pressure, but seems to blow past the 1st gear shift point and revs up to 4500 RPM or so then shifts. .... The 1 - 3 shifts actually felt pretty natural.

[PDF]Simple Shift Installation and Tuning Guide for Ford Trans ...

https://www.powertraincontrolsolutions.com/.../download.php?...Simple...

05 Chrysler pacifica is a 4 speed automatic, next time buy a car with a 5 speed automatic

gear

is your gear a stick shift
0r
and automatic.
same to the 1million other posts the same... no lack here.

old post, , M/t box. (built many)
jumps out of 1st gear.
bad shift linkage.? ever try shift it with no shift lever. to prove that? (ask)
bad 1'st gear dogs. !
bad bearing near 1st gear, causing it to bounce and jump out.
bad synchro, blocker, hub that dogs to 1st.
shift rail dentent balls failing , springs on balls, or plug fell out.

the blocker and dogs, hold the gear,
the box is constant mesh box, so gears never shift.
on the dogs lock up . (and effects a shift)
if you need a photo of that action or video that too is easy.

1st gear has the gross effect of putting huge gear spreading actions
from top 1st gear to bottom cluster, they want to spread.
so any bearings that can allow that, there, will cause 1st to fail.
easy.

there are only 3 issues here.
1 weak engine, , even 1st gear I have no engine power.
2: 1st revs normal but wont shift up.
3: the transmission slips. (flares) RPM goes nuts.

which one?

No such figure. Shift points can be near the redline RPM or just above idle, it depends on hard you press the gas pedal.

Is it a Manual Transmission or Automatic? If it's a manual, it sounds like your syncro's are going out on your transmission for 2nd gear. You will probably need a rebuild or replacement.

For Automatic transmission problem,click the link below:---- Automatic transmission troubleshooting:----

http://howtobyme.blogspot.com/2011/11/automatic-transmission-will-not-go-into.html

---------
Automatic transmission shift lever issues?-------

http://technoanswers.blogspot.com/2012/01/automatic-transmission-shift-lever-hard.html

-----------
AUTOMATIC TRANSMISSION FLUID LEVEL? --

http://schematicsdiagram.blogspot.com/2011/07/how-to-check-automatic-transmission.html

--------------

AUTOMATIC TRANSMISSION FLUID AND FILTER?

http://schematicsdiagram.blogspot.com/2011/07/how-to-change-automatic-transmission.html

-----------
Transmission fault light on car dash?

http://schematicsdiagram.blogspot.com/2011/12/transmission-fault-light-on-car-dash.html

--------
Transmission shifting problem?

http://schematicsdiagram.blogspot.com/2012/01/transmission-shifting-problem-on-toyota.html

--------
Transmission Slips out of 2nd gear?

http://repairhelpcenter.blogspot.in/2012/02/transmission-slips-out-of-2nd-gear.html

-----------
OD light flashing and transmission fluid leaking?

http://repairhelpcenter.blogspot.in/2012/02/od-light-flashing-and-transmission.html

----------
Why Transmission fluid leaks near radiator?

http://repairhelpcenter.blogspot.in/2012/02/transmission-fluid-leaks-near-radiator.html

----------
Transmission fluid leaking?

http://technoanswers.blogspot.in/2012/02/ford-windstar-transmission-fluid.html

-------------
****** wont go in reverse?

http://technoanswers.blogspot.in/2012/02/dodge-neon-wont-go-in-reverse.html

-------------
Automatic transmission will not go into reverse?

http://technoanswers.blogspot.in/2012/02/dodge-automatic-transmission-will-not.html

----------
Transmission is making buzzing noise?

http://technoanswers.blogspot.in/2012/02/transmission-is-making-buzzing-noise.html

-----------

This will help.

Thanks.

There is a cable that goes from the throttle body to the transmission. usually by the throttle body you can adjust the cables lenghth by pushing in the tab. only move this a couple of notches at a time, test drive and see where it shifts. adjust as necessary. 1st gear should be at 15 to 20, 2nd at 30. Let me know if this works for you , we can go from there.
Randy

try replacing the altonator low voltage will not let it shift.also a stoped up exaust system will cause the same problem.