Cars & Trucks Logo

Related Topics:

T
Teresa HOpkins Posted on Feb 12, 2014
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Fuel guage wont read

My fuel guage will not move off of empty. I never know how much fuel I have in my truck. What causes the guage to not read?

  • Hannah Schroeder
    Hannah Schroeder Oct 16, 2017

    It must be really frustrating not knowing how much fuel is in your truck! My Subaru has a similar problem, except the gauge plummets to empty after it hits halfway, even though I can keep driving for a couple of hundred miles. I'm not sure about you, but I think I'll take my Subaru to a mechanic to see if they can fix the gauge. http://www.danics.com.au/

×

2 Answers

jack layton

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Chevrolet Master 5,569 Answers
  • Posted on Oct 16, 2017
jack layton
Chevrolet Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Nov 12, 2014
Answers
5569
Questions
0
Helped
2395197
Points
20059

Click on the link, this site has some info. I sometimes use a couple of resistors, one represents empty and the other represents full, use the resistor between the two terminals for sending unit, key on, see if gage reacts properly to each resistor, if it does, the problem is the sending unit in the gas tank or the electrical connector. It the gage still doesn't react proper, either wiring circuit problem or maybe the gage is faulty.
http://www.tanksinc.com/index.cfm/page/ptype=results/category_id=159/mode=cat/cat159.htm

Lawrence Oravetz

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Chevrolet Master 10,558 Answers
  • Posted on Dec 06, 2014
Lawrence Oravetz
Chevrolet Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jul 28, 2008
Answers
10558
Questions
1
Helped
2696911
Points
29284

The wire to the sender in the fuel tank is shorted. If it was open or disconnected it would read full.

Ad

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Oct 04, 2008

SOURCE: 2006 trailblazer

Ajkill is right. I had the same problem with the fuel light always being on and the guage read empty no matter how much fuel is in the tank. I had to have the fuel level sensor in the tank replaced. This is something that they have to drop the tank for. It was about $400 with the part and labor at the dealership.

Ad
emissionwiz

Marvin

  • 85242 Answers
  • Posted on May 12, 2009

SOURCE: Fuel Guage reading full

this problem is caused by a defective fuel gauge sending unit in the fuel tank.

Anonymous

  • 118 Answers
  • Posted on Jul 20, 2009

SOURCE: 2001 chevy silverado 1500 headlights wont shut off

You will have to have the dealer reset the security light to restart vehicle.Check all engine and chassie grounds because this is where the lighting would exit the vehicle.It sounds like a ground burnt through.

Anonymous

  • 1 Answer
  • Posted on May 06, 2010

SOURCE: fuel guage moving all over 2006 chevy trailblazer

I had this problem as well. Took it to the garage and it was a $700 bill the part alone was $440 they had to drop the gas tank - and since then it's not been working right. The fan clutch went a week later another $700 bill. Picked it up and it was still making the same sound - garage replaced another sensor without charging me--picked it up and three days later the service engine light came on. Back to garage and another $80 part was needed under the hood. All this with just 52,500 miles and I keep it well maintained. Not a happy camper at all! Holding my breath but it's been only two days so far so good.

Anonymous

  • 343 Answers
  • Posted on May 08, 2010

SOURCE: fuel guage & water guage are not working

The gas tank sending unit has a float on it to register the amount of gas in the tank. The float is probably faulty which will cause erratic readings and is a fairly common issue with some GM units. Replacement of the sending unit should resolve that issue. As far as the coolant temperature gauge, it could be a faulty temperature sending unit or a thermostat that is stuck open or someone removed the thermostat. This will cause the engine to never reach operating temperature which in turn makes the engine run rich and can clog cat. converters and destroy some sensors.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

My fuel gauge worked yesterday and toady it will not register anything but empty. What could possibly be wrong with my car?

could be a few thing's, most obviouse not a lot of fuel but I take it you have plenty in your car, sticking fuel guage,faulty connection somewhere, or a dicky guage are some of the causes
0helpful
1answer

Fuel tank full. guage reads empty, and dash display says 0 miles to empty.

check the sending wire to see if you have a bare spot
if you don't know where the sending wire is we don't know either
as what year
model
etc
0helpful
1answer

Fuel guage does not work

The most common cause of an inop fuel gauge is the fuel level sender inside the gas tank is defective, this causes the gauge to read empty or just move a little when filled in some cases depending on where the break in the resistor that the float moves is located.
0helpful
1answer

2004 PETROL X TRAIL READS EMPTY ON FULE GUAGE WHEN FULL AND WONT AXCELLERATE

Something is wrong fuel gauge you should have them fixed by a technician to be restored in good running condition
0helpful
1answer

GAS GAGE WANT STOP READING EMPTY WHEN GAS IS IN IT

To confirm if the fault is with the Rheostat float within the fuel tank or the fuel guage in the dashbboard, you can remove the wiring to the fuel tank float. If the guage reading changes- to full- then the guage is good and the fault can be a jammed rheostat which can be removed from the tank and replaced after draining the tank. The guage can be tested on the outside with a ground wiring to the plate of the fittings and as the float is moved the guage must show a change in reading. if not the voltage must be measured to confirm the working of the guage.
0helpful
1answer

2006 ENVOY fuel guage reads empty after fill up. What is the cause and how to rectify?

Usually I find there are two common causes for this problem. If the gauge goes to empty after a fill up but then starts to work and be fairly accurate as the fuel level in the tank drops then it's often the fuel level sending unit which is attached to the fuel pump module inside the tank. I have seen some guages go bad also [actually the servo motor that runs the gauge] but usually the gauge will stick in one spot and rarely move or go to either end of the scale and stick there. A good shop should be able to determine the cause of your problem pretty quickly. Hope this helps and good luck!
4helpful
2answers

Gas Gauge not reading correctly

The most likely culprit is the sending unit in the tank. They are relatively easy to change, as long as you don't have much fuel in the tank. It's a mechanical unit that has a float that raises and lowers with the fuel level, however with age, the floats can develop leaks and no longer float, of the electronic portion of the unit can go bad and not register the proper level. They are replaced and an entire unit, so it doesn't matter which happened, you will need to change the fuel tank sending unit.
0helpful
1answer

Fuel guage reads 1/4 at all times even when full. How do I repair

1.If the needle on the guage is stuck. you can try tapping the guage to see if the needle moves or turn the ignition on and off a few times to see if you can get it to move. If the guage drops to empty when you turn off the ignition you know that its not the guage. (note that the guage does not drop to zero when ignition is off with all cars of this age).

2. The problem could be with the sensor in the fuel tank itself. Rocking the vehicle up and down from the rear (you will need help doing this) may free the sensor level indicator ball in the tank.
0helpful
1answer

2004 Dodge Stratus gas guage starts to go empty

You likely need a new fuel sending unit (it's in the trunk, and is what drives the gauge).
Not finding what you are looking for?

181 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...