I have a 2004 Dodge Ram with a Hemi and the Scan tool I own will not communicate with it and the local parts store pulled a code for me showing a bad EGR valve, yet all my literature does not even show the truck having this code or an EGR valve for that matter....

Question 1

0helpful

1answer

How do I place the yoke back I dont know how it goes, fell out now I got replacement from a wreck yard is any markings or a process to place back in 2004 dodge ram 1500 5.7 hemi one piece drive shaft

What is the condition of the yoke part. Is it still functional? Try getting one on eBay, like this part:

04 Dodge Ram 5 7L Hemi 1500 4x4 4wd Front differential pinion gear YOKE

If you need new parts, try here:

Search Results DODGE RAM 1500 4x4 5 7L Hemi V8 5 Spd Automatic 545RFE...

Feb 17, 2015 • 2004 Dodge Ram 1500

0helpful

1answer

Well a bad crankshaft sensor cause engine to backfire through intake and not start 05 Dodge Ram 1500 5.7l hemi

get the codes from the ecm.most parts store will do that for free and ask what the code is.

Feb 08, 2015 • 2005 Dodge Ram 1500

0helpful

1answer

04 DODGE Ram hemi cylinder 3 misfire

Check engine compression and compare. then test running engine compression most engines have about 130-170 cranking compression and about 90-110 running compression. OR bring that cylinder to its Top Dead Center compression stroke apply air to the cylinder and check to see where the air is going open throttle plate bad intake valve, from exhaust pipe bad exhaust valve, from oil cap piston rings.

Mar 23, 2014 • 2004 Dodge Ram 1500

0helpful

1answer

Codes truck not starting

Where did these codes come from? They are not pcm codes. PCM codes start with P and are followed by 4 digits. Most auto parts stores will read these for little or no charge.

2004 1500 Quad SLT Hemi

Jun 12, 2013 • 2004 Dodge Ram 1500

1helpful

1answer

The electronic throttle control light is flashing in my 2004 1500 5.7 Hemi truck, won't accelerate but does turn on, where should i start?

The 1st thing that MUST be done is to have the electronic engine control system computer (called the "PCM") scanned for fault codes, this gives you the starting point for diagnosis od why the warning/fault light is on. You can get the scan for fault codes done for free at any Autozone or similar discount auto parts store in your area. Aamco Transmission does the scan for free as well.

Nov 13, 2011 • 2004 Dodge Ram 1500

0helpful

1answer

Is there a special tool to remove the fan from the water pump on a 2004 ram 2500 hemi?

If it has the big nut on the shaft screwed into the pump connecting the fan clutch,then there is a fan clutch tool for this at the auto parts store

May 11, 2010 • 2004 Dodge Ram 2500

1helpful

1answer

I have a 2004 dodge ram 1500 hemi. some times the engine light comes on and stays on for a day or so and then turns off. i checked the water and oil and everything seems fine. there are 40000 miles on the...

You will need to have it scanned to find what is triggering the light. It will be stored in memory codes. I don't normally recommend it, but auto zone will scan it for free.

Oct 08, 2009 • 2004 Dodge Ram 1500

4helpful

1answer

Unable to remove fan from water pump

Remember, fan has a reverse thread. Righty-tightey, lefty-loosey does not apply. You need a clutch fan wrench. (available at your local auto parts store.)

Aug 16, 2009 • 2004 Dodge Ram 1500

0helpful

1answer

Blinker showing up on right side when left side is signaled to come on on my 2004 Dodge Ram Hemi

either the multifunction switch is bad or the wiring harness for the blinker is worn threw in the steering column, take it to a shop before you burn up the wirng harness, even if it's fuesd it can still melt thewires and cost a ton of money to fix.

May 28, 2009 • 2004 Dodge Ram 1500

2helpful

1answer

CODE P0406 APEARS '04 DODGE HEMI

P0406 is the EGR valve. It sits on the right front of the engine. Just remove the two bolts on the tube and the two bolts on the valve itself and there you go. Reset the lamp with a scan tool or by disconnecting the battery for a couple minutes and retest.

May 20, 2009 • 2004 Dodge Ram 1500

Question 2

Anonymous

Contributor 1 Answer
Posted on Jun 10, 2009

Anonymous

Contributor

Joined: Jun 09, 2009

Answers

1

Questions

2

Helped

400

Points

3

My 2004 Ram has the same issue. Check engine light and the truck sometimes will stall out when breaking. The EGR valve is about $60 at NAPA and its not hard to install, i think four bolts hold it in. Then undo your battery for about 10 minutes and the check engine light should reset.

Related Topics:

I have a 2004 Dodge Ram with a Hemi and the Scan tool I own will not communicate with it and the local parts store pulled a code for me showing a bad EGR valve, yet all my literature does not even show the truck having this code or an EGR valve for that matter....

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

How do I place the yoke back I dont know how it goes, fell out now I got replacement from a wreck yard is any markings or a process to place back in 2004 dodge ram 1500 5.7 hemi one piece drive shaft

Well a bad crankshaft sensor cause engine to backfire through intake and not start 05 Dodge Ram 1500 5.7l hemi

04 DODGE Ram hemi cylinder 3 misfire

Codes truck not starting

The electronic throttle control light is flashing in my 2004 1500 5.7 Hemi truck, won't accelerate but does turn on, where should i start?

Is there a special tool to remove the fan from the water pump on a 2004 ram 2500 hemi?

I have a 2004 dodge ram 1500 hemi. some times the engine light comes on and stays on for a day or so and then turns off. i checked the water and oil and everything seems fine. there are 40000 miles on the...

Unable to remove fan from water pump

Blinker showing up on right side when left side is signaled to come on on my 2004 Dodge Ram Hemi

CODE P0406 APEARS '04 DODGE HEMI

Not finding what you are looking for?

2004 Ram 1500

How do I place the yoke back I dont know how it goes, fell out now I got replacement from a wreck yard is any markings or a process to place back in 2004 dodge ram 1500 5.7 hemi one piece drive shaft

Ask a Question

Check Out the Latest Top Trucks Report!

Top Dodge Experts

ZJ Limited

Ronny Bennett Sr.

Thomas Perkins

Are you a Dodge Expert? Answer questions, earn points and help others

Manuals & User Guides

Customer_support_article-pdf-39.pdf....

Related Topics:

I have a 2004 Dodge Ram with a Hemi and the Scan tool I own will not communicate with it and the local parts store pulled a code for me showing a bad EGR valve, yet all my literature does not even show the truck having this code or an EGR valve for that matter....

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

How do I place the yoke back I dont know how it goes, fell out now I got replacement from a wreck yard is any markings or a process to place back in 2004 dodge ram 1500 5.7 hemi one piece drive shaft

Well a bad crankshaft sensor cause engine to backfire through intake and not start 05 Dodge Ram 1500 5.7l hemi

04 DODGE Ram hemi cylinder 3 misfire

Codes truck not starting

The electronic throttle control light is flashing in my 2004 1500 5.7 Hemi truck, won't accelerate but does turn on, where should i start?

Is there a special tool to remove the fan from the water pump on a 2004 ram 2500 hemi?

I have a 2004 dodge ram 1500 hemi. some times the engine light comes on and stays on for a day or so and then turns off. i checked the water and oil and everything seems fine. there are 40000 miles on the...

Unable to remove fan from water pump

Blinker showing up on right side when left side is signaled to come on on my 2004 Dodge Ram Hemi

CODE P0406 APEARS '04 DODGE HEMI

Not finding what you are looking for?

2004 Ram 1500

How do I place the yoke back I dont know how it goes, fell out now I got replacement from a wreck yard is any markings or a process to place back in 2004 dodge ram 1500 5.7 hemi one piece drive shaft

Related Topics

Ask a Question

Popular Questions

Vacuum hose diagram.dodge ram,1500,4x4,5.2l

Electronic Throttle Control light

Need stereo wiring diagram

2005 dodge ram 5.7 hemi

Brake line diagram for

Check Out the Latest Top Trucks Report!

Top Dodge Experts

ZJ Limited

Ronny Bennett Sr.

Thomas Perkins

Are you a Dodge Expert? Answer questions, earn points and help others

Manuals & User Guides

Customer_support_article-pdf-39.pdf....