Had to change battery on 2002 mercedes e430 and i have the radio code but it wont accept it what can i do

P0763 MERCEDES-BENZ Shift Solenoid 'C' Electrical

www.autocodes.com > p0763_mercedes-benz

The P0763 code is detected when the gear required by the ECM does not match the actual gear when vehicle is driven. Possible Symptoms. Engine Light ON (or ... Missing: E430 ‎saying

Diagnostic Trouble OBD Code P0763 - PartsAvatar.ca

partsavatar.ca > p0763-obd-ii-trouble-code-shift-soleno...

The trouble code P0763 can be defined as Shift Solenoid C Electrical. This diagnostic fault code is a generic powertrain code, which means that it would apply to ... Missing: 2001 ‎Mercedes ‎E430 ‎saying

Mercedes Fault Codes and What They Mean - Burdi Motorworks

burdimotors.com > 2017/12/26 > common-mercedes-fa...

Dec. 26, 2017 - Common Mercedes Fault Codes That Trigger Your Warning Lights. Posted on Last updated ... P0763, Shift Solenoid C Electrical. P0764, Shift ...

P0763 Shift Solenoid C Electrical - OBD-Codes.com

www.obd-codes.com > ...

The purpose of the Shift Solenoid Circuit is for the PCM to monitor the shift solenoids to manage the movement of fluid between various hydraulic circuits and ...

• Radio Codes and advice are always available here

www.ukbookshelf.co.uk

• Mention FixYa Forum

You should be able to get it from a mercedes-benz outlet,if you havent already try them.

All codes are different . Get it from the dealer , make and model of car and radio will be required. Proof of ownership required so take paper work.

Remove the cables from the battery if its to be charged in the car other wise you could get a power surge and ruin the computer. then connect the charger . the computer will reset its self while driving, the radio code will required to reset it.

Try going here http://www.benzworld.org/forums/w210-e-class/1416864-w210-radio-code-unlocking.html

We can't supply radio codes here at Fixya, we don't have access to the MB facotry computer data.

If the ABS warning is on then the systems control module has sensed a fault in the ABS system and has turned off the ABS, you now have just regular non ABS brakes. The removal of the negative cable may or may not be the cause, the ABS module must now be tested for fault codes, this is done with a special scanner, any good brake shop or tire shop can perform this test..

all you need to do is call 765-448-4582..give them the vin# and they will give it to u for free.. good luck and thanks for using fixya.com...keith..

If you call your merc dealer they should give it to you on the phone, if not have a look at this web site, if not, then if you take out the unit and let me know the s/no: i will see i have it.
http://www.radio-code.co.uk/code-entry-help.php

[email protected]