Multiple failures will contribute to this symptom. Both mechanical and electrical issues need to be looked at. Check for "Engine light" and any active or stored engine codes. Running a cylinder compression test, fuel line pressure test, exhaust pressure test, check the timing, check for misfire, check for clogged fuel and air filter, defective MAF or MAP sensor, check for vacuum leaks. The more details you can provide. I may be able to help you more.
SOURCE: my 1999 gmc jimmy will not start unless i use starting fluid
u may want 2 check with a dealer gmc dealer but u may have 2 fuel filters on your jimmy poss. an in-line filter runs down the pass. side or driver side not all cars are the same
SOURCE: firing order for gmc jimmy 1999
-Drivers side starting at the front of engine: 1-3-5
-Passenger side starting at fornt of engine: 2-4-6
SOURCE: 1999 gmc jimmy 151k miles code 0452, emmissions help
THIS IS A FUEL TANK PRESSURE SENSOR CODE. MOST LIKELY THE SENSOR ITSELF IS BAD BUT CHECK THE WIRING AND THE ECM.
SOURCE: 1999 gmc jimmy w 4.3 v6. cannot find oil filter
look under the front of your blazer, just below the bumper, and you will see a little access door in the plastic guard. Open this door, and you will find your oil filter.
128 views
Usually answered in minutes!
×