Cars & Trucks Logo

Related Topics:

I happen to cross terminal the battery while i was trying to jump start the car, have change the fuses, truck starts but won't idle

5 Related Answers

Anonymous

  • 12 Answers
  • Posted on Feb 26, 2009

SOURCE: 99 dodge 1500 will not idle after jump start

i had hte same problem wiht my 95 it sat for two months and it did this either youhave a couple of dead cells in your battery or you alterator could be going bad wither that or a nasty combination of them both

Ad

Anonymous

  • 1 Answer
  • Posted on Mar 01, 2009

SOURCE: 2000 dodge neon won't start.

look everyone !!! i am not the only one who has this problem , but I found the answer on my own.... iI hope this can help others . If you have to replace a neon engine you must do these thing if you want it to start.
<br>
Lower vehicle and perform camshaft and
crankshaft timing relearn procedure as follows:
² Connect the DRB scan tool to the data link
(diagnostic) connector. This connector is located in
the passenger compartment; at the lower edge of
instrument panel; near the steering column.
² Turn the ignition switch on and access the “miscellaneous”
screen.
² Select “re-learn cam/crank” option and follow
directions on DRB screen

Most people don't have access to this scanner <but it must be done> I used a snap-on cost 3000 but have the reset feature

Thanks you all for your help.

Anonymous

  • 91 Answers
  • Posted on Apr 10, 2009

SOURCE: 2002 dodge ram 1500 flashing red light and dead

When you disconnected the battery, you tripped the alarm which locked down everything. In your owners manual, look under the security or alarm system. It will tell you how to disarm your particular alarm system. If I am not mistaken on these you put the key in the drivers door and lock and unlock it 2-3 times. If you do not have the owners manual, you can contact dodge and they will walk you through it.

Anonymous

  • 171 Answers
  • Posted on Aug 25, 2009

SOURCE: all gages on dashboard, including turn signals not working

one of the smaller red wire at the battery terminal has a bad conection, you may have to make or replace the battery + cable connection.

Anonymous

  • 710 Answers
  • Posted on Sep 05, 2009

SOURCE: changed battery 1998 dodge intrepid alarm wont stop

PUT THE KEY IN THE DRIVERS' DOOR LOCK AND UNLOCK IT. THANKS FOR USING FIX-YA. PLEASE KEEP ME POSTED

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1990 ford ranger 2.9 wont start. No power at solenoid s terminal. What is it?

Check engine compartment fuse box FUSE 1 60 amp. If it checks ok then a failure of either the ignition switch, transmission range switch, or a break in any of the interconnecting wires.
0helpful
1answer

1998 GMC Safari van won't start.

The ground should connect to the motor and the motor should connect to the body or chassis. Pour some water on the connection to the engine and the battery terminals. If it is a bad connection things should improve. If you jump start, the donor vehicle needs to be running at a fast idle.
0helpful
1answer

I have 05 kia rio. jump started dead battery but the cables were crossed and killed it instead. purchased new battery. car stuck in park. worked when screwdriver in override button but still won'

There is a large maxi-fuse between the battery and alternator. Its at least 100 amp or more. It may be in the cable at the battery, or in one of the fuse boxes.
You may also have damaged the key switch or the brake circuit.
You may have to get a book to get the wiring diagrams to check everything involved.
0helpful
2answers

My 1993 Ford Aerostar Van won't start without a jump and when it does it won't stay running. Is it a fuse or the aternator?

jump start vehicle warm it up so its idle then disconnect the negative battery terminal ,if engine stops then the alternator is no good ,if it keeps running then renew the battery
0helpful
1answer

Car starts when it's jump but won't start again could it be the starter

the battery in your in car is maybe drained or damaged or the alternator which suppose to charge your battery is not working so the battery remains uncharged. One way to know if battery is not being charged, jump your car and disconnect from jump leads and take out any one of battery terminals. If engine stops, then your alternator is not working and if it remains idling, then your battery is faulty. Replace battery and see if it works.
0helpful
1answer

I have a jaguar x type 2002 and now and again I try to start it nothing happens. All I here is some clicking but engine won't start. Happening more and more.

Sounds like a loose connection, check your battery terminals are tight. if you have to boost or jump start the car check your battery condition and alternator output. Check the terminal on the starter motor and solenoid. Finally check the starter
0helpful
1answer

I happen to cross terminal the battery while i was trying to jump start the car, have change the fuse , but the engine light is on and the car won't rev.

Check for the code on the computer to see if there is a code set for a particular system.

A 2005 Toyota Corolla would use an obd-II scanner to retrieve codes.

Something may have burnt out in addition to the fuse when the wires were crossed when jump starting.
0helpful
1answer

Help ! ! !

check all of your fuses underneath the hood and also fuses under the dash
Not finding what you are looking for?

34 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...