Had to do major work on Freelander 1 1.8 petrol. This was replacement of valves, head gasket, timing belt etc. Car now runs, but rough, and has a loss of power in higher gears when driven. Suspect the engine ECU is at fault - not pumping enough fuel. How do I reset the ecu?
SOURCE: replaced fuel pump in 2000 hyundai elantra and
well if she ran it to long with no oil it might be locked up and might be able to turn it over if its not to bad. but you should still get power going to your fuel pump i would check all connection going to fuel pump and no broken wires. try even un plugging battery to see if there's a bypass
SOURCE: 98 Chevy Tahoe 5.7 liter engine cuts out and
Have you checked for vaccume leaks?
You've got lots of parts in there, Has the problem been the reason you have replaced all of those, or did it come up while doing some of the repairs?
SOURCE: loud diesel knock nissan terrano II head just replaced.
some black smoke comes out when i put foot down and loses power when goiong uphill i have a nissan mistral/terrano 2.7td
SOURCE: I have a 1997 Mitsubishi Galant with rough idle
I am having the same issue on Mitsubishi Galant 02. Clattering on acceleration, herky jerky idle. Pulled a code multiple cylinder misfire. My mechanic's diagnosis is bad valve cover gasket causing oil to seap into the spark plugs and bad timing belt, which I have not replaced at 150k miles. I do however know my fuel injectors do need cleaning, he hasn't ruled that out either. Have you pulled any code on it? I have read on engine knock sensor going out on some of these also. Hope this helps some.
SOURCE: mercedesw202 c200 pms ecu system . car wont start
Hi I have a 1995 C200 Auto Sedan chs WDB 2020202F241703, I think I have a problem in the ECU. Only runs on two cylinders, I have changed the core pack on the 1 & 4 cylinders but the problem persists. The other problem is I don't know where the ECU (engine computer ?) is can anyone help ?
820 views
Usually answered in minutes!
×