Question about 2001 Pontiac Aztek

1 Answer

My aztek 2001got attached with a welding rod of high voltage died

My Pontiac aztek 2001got attached with a welding rod of high voltage we were trying to fix a leakage from exhaust pipe.i need help to fix it back.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 299 Answers

You probably fried the engine control module if you did not disconnect battery first.If so you can go online and order reman unit that you will give them your vin# and the will pre flash program for your car to it.this will be needed toset up correct options.

Posted on Jun 21, 2009

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need know how get shift out streeling knuckle on 2004 Pontiac Aztek front wheel drive what all tools i need


2004 Aztek: replace the right front steering knuckle - JustAnswer

www.justanswer.com > Car Questions > Pontiac Problems
2004 Aztek: replace the right front steering knuckle - Answered by a verified Pontiac Mechanic.

How do i change a CV Joint on a pontiac aztek - JustAnswer

www.justanswer.com > Car Questions Disconnect the outer tie rod end from the steering knuckle; do NOT loosen the tie rod end jam nut. Refer to Rack and Pinion Outer Tie Rod End Replacement in ...

steering knuckle video for 2004 Pontiac Aztek Google Search

Jun 25, 2017 | Pontiac Cars & Trucks

1 Answer

Why doesnt my ac blower work on my 2004 pontiac aztek


check for voltage at the blower motor with the switch on, if none check for voltage at the resistor and the fan switch.

Oct 01, 2012 | 2004 Pontiac Aztek

1 Answer

Stalling at low speeds for a 2002 Pontiac Aztek


Does the battery light come on before the engine dies, or after ?
After is normal because the engine is not turning the alternator.
Is the check engine light on when the engine is running ?
Common causes for stalling are a dirty throttle body or faulty idle air control valve.

Jul 24, 2012 | 2002 Pontiac Aztek

2 Answers

2004 pontiac aztek thermostat replacement? overheated today. never done it before. mileage is 64000, 3400 engine


The thermostat is located behind the metal housing that is bolted to the intake manifold on the drivers side of the engine below the throttle body.

There are 2 bolts holding the hosing on. A 13mm swivel socket and a 13mm wrench will be needed to remove the bolts.

Sometimes it is easier to remove the throttle body if it is your first time. It will let you see what you are doing a little better.

1. remove the air cleaner cover and hose attached to the throttle body.
2. remove the throttle body (optional)
3. Using a swivel socket and wrench remove the 2 bolts holding the thermostat housing from the intake manifold.

airjer995_36.jpg

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Jan 30, 2011 | 2004 Pontiac Aztek

1 Answer

Aztek 01 headlights going out.


Check for moister in the lamp head,and have the alternator checked,it should be from 13.65,to 14.25,volts only,any more,that will be the problem,also,if the alternator checks out ,with in range,have a mechanic check the alternator for ac voltage,if the alternator diode,or diodes,have gone out,it will produce some ac voltage,therefore blowing lamps,and eventually ignition components,and e c m.

Dec 29, 2009 | 2005 Pontiac Aztek

1 Answer

2001 Pontiac Aztek STILL will not start.


If the car is clicking, it is most likely the starter engaging, but it doesnt have enough power to crank. Charge the battery or try getting a jump.

Feb 17, 2009 | 2001 Pontiac Aztek

2 Answers

I am changing intake gaskets and need the torque specs. for the rockers 2002 pontiac aztek 3400


89 inch pounds then 30 degrees. make sure the push rods get put back in same place they came out they are different lengths. If you ever do another one of these buy the tool for the rocker arms and you will not have to remove them or the rear valve cover. please rate

Dec 27, 2008 | 2002 Pontiac Aztek

1 Answer

2002 Aztek Service engine light on & high beam indicator flashes


The high beam light flashing means you have a high beam burnt out. It flashes when you put it in gear because your high beams actually double as your daytime running lights, only on a lower power.

Dec 17, 2008 | 2002 Pontiac Aztek

Not finding what you are looking for?
2001 Pontiac Aztek Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...