- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
half of the plugs will be on the left, and half on the right of the engine. You will find a cable going in between the exhaust heads, those cables go to the plugs.
Use a plug puller to reomve the caps with out damaging them,
then remove the spark plugs with a socket designed for spark plugs, then verify the proper gap on the new spark plugs
install the new plugs,
place the caps back in the same spot they came from
the caps should make a clicking noise if they seat right.
The problem is in the heater box. To be more specific, the blend door. Check blend door operation and blend door motor. Located right side under dash. Remove blend door motor, with vehicle running, move switch from panel to defog and see if blend door motor moves.
Remove headlight you will see 1 ( see pic) rods on top of the headlight you are going to turn them then pull up on the rods the pull out on the headlight.The look at the back side of the marker light and you will see a tab on left side push it the lenses will come out.
×