Ihave changed clutch plate in van bled the clutch but when i push my foot down the clutch relases it self
SOURCE: No clutch resistance on audi a4
This sounds like a common Audi problem but its usually in early shape A3s and TTs. If you heard a snap, then possibly the pedal has broken where the clutch master cylinder connects to it. In this case you can just replace the pedal but it can be an early sign of a faulty master cylinder. If the pedal is ok, it maybe the master that has failed and needs replacing. Worse cases, the slave cylinder maybe faulty or even the release bearing could be sticking on the input shaft. Bleeding the brakes will not help, the clutch shares the same fluid and reservoir but is on a different hydraulic system. The clutch would need to be bled from the bleed nipple on the slave cylinder on top of the gearbox. This can be difficult without the car on the ramp, but is worth trying before replacing parts. What engine does it have?
SOURCE: brake pedel pushes to the floor
pump the pedal about 10 times and see if it comes back up, u need to pump the caliper pistons out after a brake job.
SOURCE: how to change gearbox oil on a toyota hiace van...
Creating Gears Problem 1st and 3rd sleeping gears, how to romove this problem
569 views
Usually answered in minutes!
×