RADIO CODE NEED RAIDO CODE

Hi Jeff,

i think your radio has power problem.
please check the radio fuse on fuse board if its good please ask for repair electronics technician to fix power problem of your radio.
it can be the failure of sound output cct or power regulater cct .

regards,
nuwan

you will have to call mitsubishi with your vin# and have the raido out so ou can give them info off the raido.

you need to reset the immobiliser/keypad and put in the code (supplied when new) for the radio.

dealer only

YOUR RAIDO HAS A CODE # TO PREVENT THEFT, YOUR DEALER CAN GIVE YOU THE CODE. WHEN YOU REMOVED BATTERY RAIDO THEFT CODE WAS SET OFF IN RAIDO.

having disconnected you raido y now need to re enter the raido code

tuen radio off...hold #1 and #6 on preset buttons...tuen radio back on an alphanumeric number will display theere should be 8 digits and 2 numbers...you will need to call acura and give them these numbers and they should give you a lock code to enter hope this helps

the radio must be removed and the serial number must be ran through the honda isis system to get ur code online...the radio doesnt have to be removed from the dealer but the dealer is the only one that can request the code from honda...i recommend haveing the dealer remove the radio though,, sometimes those models are tricky.....another option is to get another aftermarket stereo.....which may have better features and sound better than the factory one, they will charge u about 100 bucks depending on that dealers labor rate to remove the radio....

make of radio ,chassis number of radio

look in boot ,left hand side but check both in case ....under mat their should be a sticker with code on it,it will show model number of radio and a four figure code