2004dodgeram1500 4.7l engine codes p0300 p0304 p0113 p0344

P0300: Random Cylinder Misfire Condition
http://www.autocodes.com/p0300_toyota.html

P0301: Cylinder 1 Misfire Detected
http://www.autocodes.com/p0301_toyota.html

P0304: Cylinder 4 Misfire Detected
http://www.autocodes.com/p0304_volkswagen.html

P0300-p0304 misfire on cylinder 1-4
P1399 random cylinder misfire

p0102 is your Mass Air Flow device.
p0113 is "air intake temperature" sensor voltage too high.
p0171 is "engine running too lean"
p0300 is "random misfire"

You can pretty much ignore your p0113, p0171 may be caused by a bad MAF, and p0300 may be caused by your p0171.

the actual indication for your MAF is that the voltage getting to the computer from the MAF is too low. It could be a bad MAF, or bad wire between the MAF and the computer.

Hi Anonymous,this is a PDF can help you Diagnostic Trouble Code Table .This page mainly help you to check the trouble code when you diagnose your car with OBDII diagnostic tools.And you can use Autel MaxiDAS DS708 Update by Internet to help you .

Hi,
Did you fix the problem?
I have a 2012 GT/CS showing p0300, p0301 and also for catalyst system as well.
I´ve replaced spark plugs, checked and cleaned injectors, coils are good and now I just have no ideia what else to do.
Any idea of how to fix that thing?!

Have you had somebody clear the codes after you installed the parts.If not the codes have to be erased by using a scan tool.

I think this is a Coil problem. try replacing coil. If not, it is a MAF problem. 06 wire should still be fine now.

Unless your familiar with the cars systems
and I assume your not.
You take it to a repair shop

I have a 2004 LS V8

You can not work on that veh yourself
if your not famialiar with both OBD2
Sytems and the Lincolon LS

If you have a specific few questions
I will answer them.

all trouble codes you have are miss fire codes p0304 #4 cyl p0306 #6 cyl p0300 random miss fire sounds like you may have bad spark plugs,wires,or coils

po304 means cylinder 4 misfire detected

po344 means camshaft position circut intermittent