How do i fold the seats down
SOURCE: 2001 isuzu rodeo rear seat
Just Pull the straps that lie in between the seats. Not the seat belts but there are two straps. Pull them, pull the seat up from toward the seat back, pull out the headrests and lower the seat back. The seat cushion should/ bench seat should lie up against thge two front seats.
SOURCE: How do you fold the back seat down on a 95 Isuzu Rodeo
Here is how I fold down the back seat of my 1995 Rodeo. First thing I do is remove the headrests on the back seat. Then I place my knees (and all my weight) on the middle of the seat (bench), and pull on both belts straps. If this is done properly, I will hear each strap release. (sort of a click). As soon as I hear it release, I stand up as best I can while at the same time pulling up the seat. I then manage to step out of the Rodeo while letting the seat fall forward. After that, I am able to drop the other part of the seat into the forward position.
SOURCE: How do I fold down the rear seat of my 1991 dual
I have a 91 Rodeo, to get the seat to fold down you need to lift the bottom seat by pulling on the loop that comes out of the bottom of the seat and set it so that the back faces up, then remove the head rest by pushing the tiny button on the outside plastic piece that meats with the seat, then you will see what looks like many older door lock knobs on the top of the seat next to the wall, pull up on it and the seat will lay forwards folding flush with the cargo floor. Then just drop the headrest in front of the seat. Sounds hard but once you look at it, its really simple. You will also find some of the jack handle parts under the passenger side rear seat. If it sitll has them. While the jack is at the back in the driverside kick panel.
216 views
Usually answered in minutes!
×