Need torque specs on tie rod end
Does this include the outer tie rod nut also to be 45lbs foot torque?
SOURCE: torque specs. for outer tie rod ends for 2006
Tie rod end is 35 ft. lbs. Pinch bolt for the lower ball joint - 105 .I hope this helps you
Testimonial: "thanks for the help"
SOURCE: torque specs. for replacing tie rod end on dodge
Hello
Welcome!
The torque spec for the tyrod ends are 45 foot pounds.
• Unlock the steering wheel before jacking up the vehicle. This allows the Steering linkage to be moved for the best possible access to the ends' fasteners by grabbing one of the axle hubs
• Secure the vehicle on jackstands before removing the wheels.
• Buy name-brand tie-rod ends. Saving a few dollars on cheaply made parts isn't worth the risk.
• Mark the tie-rod ends' positions on their threaded adjusters before removing the old ends. This way, the new ends can be screwed in to approximately the same position as the old ones to get wheel allimint in the ballpark.
• Have the vehicle professionally aligned afterward, especially if the steering wheel isn't centered or the vehicle pulls one direction when attempting to drive straight.
Signs your haveing probloms with the tyrod ends
• Front-end shimmy, shake or vibration.
• Abnormal front-end noise.
• Hard steering.
•steering wheel doesn't return to center properly.
• Vehicle wanders.
• Steering feels unstable, loose or has excessive play.
6,826 views
Usually answered in minutes!
×