Question about 1997 Ford Taurus

Open Question

1997 ford tarus shift indicator

Where do I find this part at F6DZ7A110B

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

JESSIE BRADSHAW

  • 37 Answers

SOURCE: when on the highway my

You need to check the fluid and refill to proper level if low. And, if the fluid looks burnt (anything but a clear pink) it and the filter need to be changed. If that doesn't help take to a transmission shop to have it scanned because it could be a faulty or bad sensor.

Posted on Apr 05, 2011

Ad
sales31704

Catherine

  • 95 Answers

SOURCE: 1989 ford tarus shifts in to 1st and rev does not shift up

You can check if the botton is the right ,or maybe then doesn't connected we ll.

Posted on Apr 11, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I removed my instrument cluster from my 1997 ford Taurus and now it won't shift out of first gear


Your car has went into a fail safe mode, either one because the speedo is not the proper gear ratio for that particular vehicle, not all of them were the same, it depends on the exact model. For instance, a Tarus SE is different from a Tarus LE / SE / on and on, and if the gear ration is not correct, then the TCM will not ssend a signal to the shift solenoids to do their job thus the car wont shift. It sounds to me like your original issue may have been that the speedometer didn't function or work at the cluster, ad you've made repairs to the wrong part. Change your Spped Sensor, and it will be ok, IF the cluster is for that particular vehicle. If it is the proper part, your only issue is the speed sensor.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/samuel_4e847b1ae10ff587

Jan 24, 2015 | 1997 Ford Taurus

1 Answer

1989 ford tarus shifts in to 1st and rev does not shift up


You can check if the botton is the right ,or maybe then doesn't connected we ll.

Apr 11, 2013 | Ford Cars & Trucks

1 Answer

What is the torque setting for 1997 ford tarus


A 1997 Jeep Cherokee has 190-hp and 225 ft/lbs of torque at 3,000 rpm. ---------------------------------------------------------------------------------------
Tacho Pro 2008 July PLUS

Mar 27, 2013 | 1991 Ford LTD Crown Victoria

1 Answer

When on the highway my 1997 ford tarus GL wont shift into 5th gear


You need to check the fluid and refill to proper level if low. And, if the fluid looks burnt (anything but a clear pink) it and the filter need to be changed. If that doesn't help take to a transmission shop to have it scanned because it could be a faulty or bad sensor.

Apr 05, 2011 | Ford Taurus Cars & Trucks

1 Answer

I got my breaks changed and now I have a break


What is your question? .....so for we just have your statement about a leak!

Sep 19, 2009 | 1997 Ford Taurus

1 Answer

Gear shift moves fine will not engage gear.


then the transmission has failed or has sticking engagement solenoid in trans pan, have the fluid and filter replaced and see if that corrects the problem

Apr 01, 2009 | 2002 Ford Taurus

1 Answer

I have a 1997 ford tarus and it shifts hard from first gear to second gear. and the check engine light just come on today. nothing is leaking from the car and other than that the car runs great for now.


GO TO AUTO-ZONE OR KRAGEN AUTO AND HAVE THE COMPUTER TESTED FOR THE TROUBLE CODE THAT THE CHECK ENGINE LIGHT SET IN MEMORY. THIS TEST IS DONE FREE OF CHARGE, POST THE CODE BACK HERE, MOST LIKELY IT WILL BE A TRANSMISSION SHIFT SOLENOID CODE.

Dec 20, 2008 | 1995 Chevrolet Corsica

1 Answer

1997 Tarus dome light and floor lights will not go out.


This is usually caused by the switches sticking in the door latches. Try spraying some WD40 in the latches and open and close the doors a bunch of times that should take care of it.

Dec 11, 2008 | 1997 Ford Taurus

1 Answer

1997 ford tarus radio


Sounds like the amplifier has died. Best bet is to try to replace with a used one. Repairs are expensive.

Sep 09, 2008 | 1997 Ford Taurus

Not finding what you are looking for?
1997 Ford Taurus Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...