- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
In order to remove the glove box from the 2005 Hyundai Elantra, you just need to follow this steps which are as follows,
1) remove the rubber dampers from both side of the glove box (from the inside of the box)
2) Swing glovebox all the way down and remove the two pins
If you didn't understand, then refer to the video in which you will learn to remove the cabin air filter which is at the back of the Glovebox of the Hyundai Elantra 2006-2010.
From what I can tell, it looks like u have to remove the whole glovebox door which entails removing the lower dash panel on the passenger side.. That should give u access to screws to remove glovebox door. Don't tug on the door when u remove screw's, just enough space to get ur hand or something else up inside to unlatch.. If u need further info, let me know
To remove a 90' Bronco glovebox: Start by removing your stock glove box door. Take off all hinges, latches and support etc------------------------------------------------------------------------------------------- Car Diagnostic Tools
You will have to get a ratchet stye of scewdriver and go in fromt he sides of the govebox to remove screws from either side. This will remove the glove box and you can open it form the inside. Most likely the locking mechanism tab is bent. You can straighten it with pliers and test it it unlocks with a key before installing glovebox in again.
The cabin filter is located behind the glovebox.
First lower and remove the glovebox
If it has not been changed before, you will need to cut the plastic crossbrace behind the glovebox.
Once out of the way, unbolt the steel reinforcing frame behind the plastic and set it aside.
The cabin filter is mounted vertically behind it.
See images for further explanation:
does the latch have a keyhole? its probably locked, use you car key and put it in the keyhole turn the key it should unlock it and youll be able to open your glovebox
If the glove box is anything like mine it is a modular piece assembled with screws.... let them break the handle.. get a replacement first from a junk dealer and have the broken part swapped out. Its like a seat belt catch in my 97 deville. The glove box in mine flopped open and the catch had broken and fell down the door of the glovebox itself. The whole door is assembled with philips screws and should be easily removed and a new latch put in.. whoever does it should not cost more than 50.00 in labor MAYBE unless you have a friend that would do it for a beer. I saw a complete glove box on ebay for 40.00 shipping ontop of that .. i saw the latch for 20.00 +shipping.
×