Get a factory service manual. Really. If your messin' with the valve train you need the specs/procedures in the FSM.
Try the AutoZone Repair Guides:
http://www.autozone.com/autozone/myzone/profile/membershipBenefits.jsp
You'll have to set up an account but the info is free and you can get some discount coupons for online parts orders.
SOURCE: What are the torque specs for 1990 dodge dakota front suspension.
call carquest or other parts house and ask them for the torque specs or a front end alignment shop.
SOURCE: i need torque specs on 93 dodge 360 ..heads,
Cylinder Head Bolt 5.9L
Step 1 - 50 ftlb
Step 2 - 105 ftlb
Step 3 - Recheck At 105 ftlb
Tightening sequence
Rocker Arm Bolt
5.9L - 17 ftlb
SOURCE: i need torque specs on rockers and lifters for a
Lubricate the crossheads and push rod sockets and install the rocker arms and pedestals in their original loca-
tions. Tighten bolts to 36 N·m (27 ft. lbs.) torque.
Don't forget to adjust your valve lash.
here is a link to the Factory Service Manual
192 views
Usually answered in minutes!
×