SOURCE: trns shift problem
On chrysler product vehicles that use the electrical solonoids inside the trans oil pan can usually just be removed and cleaned and they will usually function correctly again. They have a tendency to get laquered up and stick if the trans fluid has not been serviced regurarly. This happenes from the neon all the way up to the dodge 3/4 ton pickups with the gasoline engines.
SOURCE: 1997 getting code P1776 & PO700 What does this mean
The code 700 is a notice that there is a problem with the trans control module, and code 1776 could be a problem with the low-reverse solenoid inside the trans. Code 1776 can trigger the code 700.
The solenoid would need to be tested.
SOURCE: i rebuilt a 41te transmission now i have codes po605/po700 does not want to shift
that is the transmission control module is not reading. did you replace it. it is in the front of the transmission
SOURCE: 2004 jeep liberty. code po750 and po700. were is the shift solenoid at and how to change
The Shift Solenoids are inside the PAN, make sure you clean the Orifice before installing the new ones
88 views
Usually answered in minutes!
×