The fuse box containing the turn signal fuses is under the hood forward of the brake master cylinder on the drivers side.
The bottom of the fuse cover should show you which one of the fuses is the left turn signal and right turn signal fuse.
Good luck,
Regards,
SOURCE: all other lights work except turn signals
thats because they use a combination flasher for the hazzards and turn,here is the location and a diagram have a good day DB
The combination flasher is located in the Junction Block (JB) behind the fuse access panel on the left outboard end of the instrument panel.
SOURCE: LEFT TRAILER TURN SIGNAL DOES NOT WORK
I'd get a 12vdc test light if you don't have one already & start from plug, and keep probing back from there. It may be as simple as a bad connection under truck where joined into harness.
SOURCE: turn signals and hazard don't work
Next best guess is the flasher unit has failed, this could be your little blue box, pick up a replacement at any auto parts store and replace it.
SOURCE: The turn signals dont work on a 2000 Ford EXplorer
most likely not in the fuse box nor is it a relay, check the fuse and replace if necessary. Turn on your hazards and listen for a clicking sound under the dash on the drivers side. Normally the hazard and turn signal flashers or near each other. Not a Ford fan so I can't exactly say where it is located.
655 views
Usually answered in minutes!
×