My indicators work but my hazards don't.when i press hazard button indicators don't work
SOURCE: Indicators keep blowing fuses Hazards ok
THE WIRES ARE NORMALLY PUSH ON LIKE SPEAKER WIRES BUT IF IT IS MELTED THERE IS A SHORT IN THE WIRE SOMEWHERE IT COMES OUT OF FUSE BOX THEN TO RELAY UNIT THEN FROM RELAY TO SWITCH THE RELAY MIGHT BE FAULTY CAUSING WIRES TO HEAT UP RELAYS ARE LOCATED IN FUSE BOX THERE IS ALWAYS MORE THAN ONE SO SWAP FOR ANOTHER RELAY REPLACE FUSE AND TRY LIGHTS AGAIN TO SEE IF THE RELAY IS THE PROBLEM HOPE THIS HELPS GLENN
SOURCE: light indicator problems
I would say try and REPLACE the turn signal fuse/relay. It should be a square, black fuse/relay on your fuse panel. They run about $10.00.
SOURCE: Vauxhall/Opel frontera indicators not working
thats a relay thats is not working propperly, must be replaced to fix the problem, just go to your dealiship and ask for a turn indicator relay for your model and ask your part sales man to show you where is located, if not...just follow that click...
have fun
SOURCE: hey, the indictaors and hazard lights on my 01
Did you check the fuses down by your gas pedal ?
SOURCE: I have a 1982 Isuzu pickup. My flashers work but my hazards don't
Check the switch and may be on seperate flasher unit
278 views
Usually answered in minutes!
×