Crank no start. Check good sparks, fuel pressure but no injector pulse from the pcm pin A3 cylinder #2, pin A5 cylinder #3, and pin A7 cylinder #4. Replaced 2 computers and still have same problem. The car will start and run with the propane bottle turn on and die out as soon you turn the propane off. Run out of ideal, need help....
SOURCE: 1992 mitsubishi precis and the fuel injectors will not work!
replace fuel pump and fuel filter
SOURCE: 2001 honda civic ex,wont start, no injector pulse,
Injector pulses are sent from the engines computer. Have that checked out
SOURCE: honda accord 1993 car was
Hello! I need to understand the problem...Just a couple of questions to get started...When you say that you changed the igniter, do you mean the ignition coil? Have you checked for spark (hold plug to ground)...If there is a strong spark and fuel, the problem is timing...The boss is the Crank Position Sensor and it may be the problem...But first I need to be sure there is spark...When you spray starter fuel into the throttle body and the engine has a strong spark, even if the timing is way off the engine will sputter...If nothing fires, I have to believe there isn't spark...Send a comment and I'll get your Honda running.............Guru..............Saailer
I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867
SOURCE: 92 hond civic
Could be difernt pcms, check the pins at the connections and make sure you have the same amount of pins..
49 views
Usually answered in minutes!
×