P2138 code acccelarator pedal position

You need a good auto-electrician to diagnose and fix that lot!

What the P2422 code means. The P2422 diagnostic trouble code is an indication that the vent valve of the evaporative emissions control system (EVAP) is stuck closed. The EVAP system reduces harmful pollutants, generated by the engine combustion process, from being expelled into the environment.P2422 OBD-II Trouble Code: Evaporative Emissions Control ...
https://www.yourmechanic.com/article/-p2422-obd-ii-trouble-code-evaporative-emissions-control-system-evap-vent-valve-stuck-closed-by-jamahl-walker#:~:text=What%20the%20P2422%20code%20means,being%20expelled%20into%20the%20environment.


P0651 HONDA Code - Sensor Reference Voltage 'B' Circuit ...
https://www.engine-codes.com > p0651_honda'P0651 HONDA code possible causes · Faulty Engine Control Module (ECM) · ECM harness is open or shorted · ECM circuit poor electrical connection · Shorted sensor on ...
https://www.engine-codes.com/p0651_honda.html

P1454 HONDA Code Fuel Tank Pressure Sensor Range ...
https://www.autocodes.com > p1454_hondaOct 9, 2016 - 'P1454 HONDA code possible causes · Faulty Fuel Tank Pressure (FTP) Sensor · Fuel Tank Pressure Sensor harness is open or shorted · Fuel Tank ...
https://www.autocodes.com/p1454_honda.html


The P2127 code means that the throttle or pedal position sensor switch E has a low input. The pedal position sensor is a sensor found on the gas pedal. The sensor tells the ECU when the gas pedal is depressed and how far it is depressed.

P2127 OBD-II Trouble Code: Throttle/Pedal Position Sensor ...

The P2138 trouble code indicates that the Engine Control Module has detected a malfunction within the D and/or E circuits of the throttle position sensor.

P2138 OBD-II Trouble Code: Throttle/Pedal Position Sensor ...

..

DTC P2138: Accelerator Pedal Position (APP) Sensor 1-2 Correlation
Electronic throttle control problem .
The throttle actuator control (TAC) system delivers improved throttle response and greater reliability and eliminates the need for mechanical cable. The TAC system performs the following functions:
• Accelerator pedal position sensing
• Throttle positioning to meet driver and engine demands
• Throttle position sensing
• Internal diagnostics
• Cruise control functions
• Manage TAC electrical power consumption
The TAC system includes the following components:
• The accelerator pedal position (APP) sensors
• The throttle body assembly
• The engine control module (ECM)

Accelerator Pedal Position (APP) Sensor
The accelerator pedal contains 2 individual accelerator pedal position (APP) sensors within the assembly. The APP sensors 1 and 2 are potentiometer type sensors each with 3 circuits:
• A 5-volt reference circuit
• A low reference circuit
• A signal circuit
The APP sensors are used to determine the pedal angle. The engine control module (ECM) provides each APP sensor a 5-volt reference circuit and a low reference circuit. The APP sensors provide the ECM with signal voltage proportional to the pedal movement. The APP sensor 1 signal voltage at rest position is less than 1 volt and increases to more than 4 volts as the pedal is actuated. The APP sensor 2 signal voltage at rest position is less than 0.6 volt and increases to more than 2 volts as the pedal is actuated.
Search P2138 on youtube ,will show diagnostic steps .

What brand part did you use ? Dorman ? OE ? Did you test the circuitry ? Did you just read the code an replace the part ? 2009 Chevy Silverado P2138 Accelerator Pedal Position Chevy is same as pontiac ! Drive by Wire training

Your vehicle has drive - by - wire , electronic throttle control . P2138 Gm Accelerator Pedal Position Sensor 1 2 Correlation

There are videos on youtube on this P2138 APPS Accelerator Pedal Position Sensor Fix 3 5L Chevrolet Impala

P0411 is an air injection pump code
P1125 and P2138 are both accelerator pedal position sensor codes

P1125 and P2138. One is for the TPS and the other is for the gas pedal. the pedal sensor is going bad, because it sends a false signal to the throttle position sensor. all of these codes are pedal position related. Hope this helps you out!

Were the APP codes there BEFORE they replaced the BCM? APP codes usually are an indicator the throttle body needs to be replaced. As a precaution, some recommend to replace the throttle body AND the sensor on the gas pedal together. Unfortunately, this is a dealer only repair most o the time, since the ECM will have to be flashed to sync the new sensors.

Here is the definition. You may need to have someone check the accelerator pedal position sensor and the circuit.

P2138 NISSAN Description The Accelerator Pedal Position (APP) sensor is installed on the upper end of the accelerator pedal assembly. The sensor detects the accelerator position and sends a signal to the Engine Control Module (ECM).
Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into output voltage, and emit the voltage signal to the ECM.
In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals.
Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation
such as fuel cut.
Read more: http://engine-codes.com/p2138_nissan.html#ixzz26J3D2x8s

P0700

The transmission of a vehicle which has suffered a transmission problem will send the P0700 code to the vehicle engine control module (ECM)

P0705 Transmission Range Sensor Circuit Malfunction

Possible causes

- Open or short park/neutral position switch circuit
- Poor park/neutral position switch circuit connection
- Misadjusted park/neutral position switch
- Park/neutral position switch may be faulty

P0455. A code p0455 most likely means one or more of the following has happened:

A loose or improperly affixed gas cap

A non-conforming gas cap (i.e. not factory/original brand)

Other leak or damaged piece in EVAP system

P1125 Accelerator Pedal Position (APP) System

P2125 Throttle/Pedal Position Sensor/Switch "E" Circuit

P2138 Throttle possition sensor

P2138 is Throttle Pedal Position Sensor/ Switch D / E Voltage Correlation. Replace the Throttle Pedal Position Sensor/Switch.Remember to have the set code Cleared from the cars computer, this will turn off the check engine light and reset it. Good Luck and have a good XMASS.