Question about 1996 GMC Sierra
Hi, my pickup starts hard after it has sat for like 4 hours. Ive changed the spark plugs, rotor, rotor cap, fuel filter. Will start after about 5 to 6 cranks, then runs fine. Fuel filter was replaced like 4 yrs before this one. Its like it maybe doesnt have enough pressure. Might you have any other ideas. I put a pressure gage on it and that seems to be ok. Might you have any other ideas?? Also put a k&n air filter on it. thanks, Mike
Could be your fuel pump relay you should check to see if the pump runes for about 3 sec. when you turn the key to the on position. It should if not the oil switch is turning on the pump after you achieve pressure.
if not check the relay. also with the pressure gauge hooked up check if your pressure drops off fast after you turn off the car. if so you need ether a pressure reg or a fuel pump.
hope this helps
Posted on Jun 20, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jan 27, 2016 | Cars & Trucks
Apr 30, 2017 | 1988 GMC C1500
Apr 10, 2012 | 1993 GMC Suburban
Apr 06, 2012 | GMC C1500 Cars & Trucks
Dec 02, 2010 | 1985 GMC Jimmy
Jun 28, 2010 | Cars & Trucks
Oct 13, 2009 | 1990 Chevrolet Corvette
Jul 13, 2009 | GMC Sierra 1500 Cars & Trucks
Nov 02, 2015 | 1996 GMC Sierra
317 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: