The reverse lights come on in 1st and 2nd gear, but do not work while in reverse. any ideas as to how i can correct this?
SOURCE: 1st gear slipping at start. reverse and other
Have you checked the trani fluid ?
It could be slipping just enough to notice in 1st gear beause that is the most resistance..
A slip is a slip..
Or it could be that the bands are warn in only first gear - wich would cause damage before long..
Some shops give free estimates..
SOURCE: my 2000 isuzu trooper reverse lights always stay
usually only 2 places it can be,,,under the car near the gear shift.....or under the centere consol inside the car, where the gear shift is, need to remove part of the centre consol to get to it
SOURCE: 1995 Isuzu Rodeo 4X4 3.2 5 speed manual, reverse lights on in 1st
the wiring on the gear box is connected to switches wrong, there bullet head connectors red to red wiring and blue to blue from switch to loom is correct
both wires on one switch are red connect these to the 2 red wires one has colour trace on it also. the other switch blue wires to blue wire on loom with possibly another colour wire but they are together. you cant go wrong the connectors are male on one wire and female on the other on each switch(detent switch)
SOURCE: hi i have lost 2nd,4th
The linkage arms inside the gearbox are defective - the only way to fix that is to take out the gearbox from the car, dismantle it completely and replace the linkage arms, a very long and complicated job that can be done only by a repair shop and it will be expensive.
50 views
Usually answered in minutes!
×