lloyd harris Posted on Apr 25, 2014

Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Torque settings for rocker shaft for a 1998 7k toyota 1800

1 Answer

Brad Brown

Toyota Master 19,187 Answers
Posted on Apr 25, 2014

Brad Brown

Toyota Master

Joined: Nov 14, 2008

Answers

19187

Questions

Helped

4344732

Points

82261

There is no such thing as a rocker shaft. There is a cam shaft, rocker arm assembly, Rocker arm, lifter etc. If you are talking about the rocker arm assembly that bolts to the head, it is 58 Ft/lbs. If you are talking about the actual rocker arms, you tighten them till they contact the push rod and the valve stem and then you put oil control clips on so the oil does not spray and you start the engine. You tighten them down till the chattering noise goes away, then back them off 1/8 to 1/4 turn.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

I have a 2001 Hyundai accent with the 1.5 l single overhead cam I need the torque number and sequence for The rocker shafts

The torque specification for the rocker shafts on the 2001 Hyundai Accent with the 1.5L single overhead cam engine is 18-20 lb-ft. The proper torque sequence is as follows:

Tighten the bolts to 8 lb-ft in a crosswise pattern.
Increase the torque to 15 lb-ft, again in a crosswise pattern.
Finally, tighten the bolts to the full torque of 18-20 lb-ft, again in a crosswise pattern.

Make sure to use a torque wrench and follow the sequence carefully to ensure proper tightening and prevent damage.

Read full answer

Mar 10, 2022 • 2001 Hyundai Accent

0helpful

1answer

Hi i just need the torque settigs on a mk2 golf 1800 engin please

Which bolts are you tightening? There are different torque settings depending what the bolt is being used for. A rocker cover bolt will be a much lower setting compared to a cylinder head bolt.

Read full answer

Apr 05, 2019 • Volkswagen Golf Cars & Trucks

1helpful

1answer

Toyota 80 series GLX auto landcruiser 1996 need head bolt torque a nd cam shaft torque settings

Torque setting Toyota Land-cruiser 80 Series 4.5 1995-98
Engine code: 1FZ-FE, 1HD.
Stage 1: 20 Nm (Start tightening bolts from center to outwards)
Stage 2: 39 Nm
Stage 3: Rotate each bolt by 90 Degrees.
Stage 4: Further rotate each bolt by 90 Degrees

Read full answer

Nov 22, 2014 • 1996 Toyota Land Cruiser

0helpful

1answer

Torque setting for 1972 Cororna

My manual shows an 8RC for 70 and 71 and an 18RC for the 72-74

18RC valve clearance HOT IN .008 EX .014 cold spec. .007 .013
Cyl head 72-82 Ft Lbs
Rocker caps 12-17 ft lbs
cam bearing clearance .001-.002
cam endplay .0017-.0066
oil tube 11-16 Ft Lbs

Read full answer

Jun 15, 2013 • Cars & Trucks

0helpful

1answer

Rocker arms

simply the rockers are on a shaft as a assy. you set them down in place over the valve and the lifter put the retainers and bolts in then step torque them down from the center bolts out do it in a few steps to make sure they are seated properly then torque to spec.

Read full answer

Jun 04, 2013 • 1996 Dodge Neon

0helpful

1answer