Question about 2003 Toyota RAV4
Replace a front seat belt in Toyota Rav 4 2003 model
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: toyota rav 4
I work for Toyota, and I will be glad to provide you with the actual answer:
The RAV/4 product is available in two models, a 4WD model and a 2WD model.
The difference between the two is on the 2WD model, there is no driveshaft going under the vehicle to the rear wheels, and no rear differential. There is no "RAV/2"; both models are called RAV/4's.
There is a lot of common confusuion about how the 4WD works. It is full time 4WD. In other words, it is always in 4WD. It does not "kick in/kick out/automatically engage", or anything like that. It is 4WD all of the time. But, when I say "4WD", that is sometimes mistaken for "all wheel drive", and, in this case, the RAV/4 is not "AWD". What this means is that if you raise the RAV/4 up on a lift, and put it in gear, 1 rear and the other side front tires will spin. True "all wheel drive" would have ALL 4 wheels spinning. This is not the case with the Rav/4. What the RAV does have, making up for not having "True AWD" on the 5 speed model, however, is a switch that locks the center differential in the transfer case, which, when engaged, applies a method of "locking" the 4WD system for maximum traction, but it is still not AWD. The automatic version doe not have this ability.
The last "true AWD" vehicle for purchase was a 1970's International Scout.
If you are considering purchasing a RAV/4, that is a very good investement. They hold their value quite well, and are virtually bulletproof; I do not make any "money" off my RAV/4 customers...
Just "gas station work". Very nice cars. I hope that this helps you, please feel free to comment back with any otherr questions...Glad to be of assistance.
Posted on Oct 17, 2008
SOURCE: toyota rav 4
I can get you a diagram on monday but it goes from the alternator to the power steering pump then around the tensioner pulley then around the crank pulley then to the a/c compressor then pull on the tensioner to give you some slack and slip it on the waterpump.I hope that helps.Let me know if you still need the diagram
Posted on Nov 30, 2008
Zero tolerance means the valves may have hit the piston when the timing belt broke. I would suggest doing a cylinder leakage test to see if the valves are bent or not. If the valves are not bent then you can replace the belt and everything will be ok. If there are bent valves then the cylinder heads will need to be removed and repaired.
Posted on Mar 03, 2009
loosen the mounting bolts on the alternator, remove the old belt, replace with the new belt, slightly tighten the top mounting bolt, pull the alternator up until the belt is tight or if there is an adjustment bolt, crank down until tight (shouldn't bow more than 1"), and tigten other hardware.
Posted on Aug 12, 2009
Tips for a great answer:
Apr 16, 2018 | Toyota RAV4 Cars & Trucks
Apr 09, 2014 | 2007 Toyota avensis 1.6
Feb 26, 2013 | 2005 Toyota Yaris 1.3
Oct 25, 2017 | Cars & Trucks
Oct 15, 2009 | 1998 Toyota Camry
Oct 09, 2009 | 1997 Toyota RAV4
Mar 03, 2009 | 1996 Toyota RAV4
Nov 30, 2008 | 2004 Toyota RAV4
Oct 17, 2008 | 2002 Toyota RAV4
95 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: