Question about 1996 Dodge Ram 1500 Club Cab
Posted by Anonymous on
Sounds like there may be a short in the system... I would do the usual... check the fuses, then the relays, if both are good, try giving the light switch itself a little wiggle, if the lights starts flickering then check behind the switch and look at the wires and the harness, check the plug itself, and the switch, check the blades, if they move then replace the switch.
Posted on Mar 01, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Open up the tail gate, you will see two torque screws on the inside beside the tail lights. take these out, this will free up the housing and you can change it from there.
Posted on Feb 01, 2009
Search for vacuum leaks. Could be your head gasket, or oil rings. Black smoke = oil is being burned. Which would mean that either your oil rings are worn out (for whatever reason, since your truck is fairly new) or that you have a head gasket problem.
Posted on Jun 04, 2009
I am having the same problem. I replaced the speed sensor on the rear diff. and the problem went away but when i started it the next day the problem came back. If you figure it out let me know.
Posted on Nov 22, 2009
Headlight Bulb Replacement
1. Open the hood and remove the two headlight mounting
2. Remove the push-in fasteners for the grill area by prying under the
head of the fasteners with a flat bladed tool.
Posted on Feb 03, 2010
Tips for a great answer:
Dec 10, 2015 | Dodge Cars & Trucks
Jul 28, 2015 | 2004 Dodge Ram 1500
Feb 05, 2015 | 2004 Dodge Ram 1500
Jan 04, 2015 | 2004 Dodge Ram 1500
Feb 16, 2011 | 2004 Dodge Ram 1500
Dec 08, 2010 | 2004 Dodge Ram
Feb 24, 2010 | 2004 Dodge Ram 1500
Aug 19, 2009 | 2004 Dodge Ram 1500
Jan 20, 2009 | 2004 Dodge Ram 1500
57 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: