Question about 1999 Ford Ranger SuperCab

Open Question

Problem with a 1984 GMC Truck S15/T15 4WD P/U V6-173 2.8L VIN B 2-bbl, can I get the proper wiring diagram for spark plugs?

Can I get the proper diagram for the wires? I think I may have a couple out of place

Posted by Anonymous on


6 Suggested Answers


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017



  • 39 Answers

SOURCE: i need the firing order of the spark plug wiring

Here ya go:

Comments: Jun 29, 2009 - Because I don't know your VIN number/letter:

a62dab4.gif Jun 29, 2009 - 2001 Ford Taurus
3.0 liter V-6 DOHC VIN "S"

This goes to the one above.
Jun 29, 2009 - This goes to the first photo:

2001 Ford Taurus
3.0 liter V-6 VIN "2" Jun 29, 2009 - Sorry....this goes to the first photo:

2001 Ford Taurus
3.0 liter V-6 VIN "U" Jun 29, 2009 - This is 2001 Ford Taurus
3.0 liter V-6 VIN "2"

It is the same as VIN U:


Posted on Jun 29, 2009


Michael Masters

  • 6784 Answers

SOURCE: 2004 ford ranger edge 3.0L spark plug wire diagram

The diagram you seek is below.


Posted on Jul 26, 2009


  • 24 Answers

SOURCE: spark plug wire instalation diagram

moz-screenshot-5.jpgd9f9005.jpgHere you go.

Posted on Nov 21, 2009



  • 85223 Answers

SOURCE: spark plug wire diagram for 91 ford f150 302

here is a diagram, if u can't see it go to the link below.


Posted on Mar 12, 2010


  • 6 Answers

SOURCE: 2002 ford f150 4.2l wiring diagram

The COIL PACK TOWERS are numbered : coil----3---4 pack---2---6 plug----1---5 ----------------------------------------------------------------- The engine cylinders / spark plugs are numbered : passenger side , front to rear , 1 , 2 , 3 -----drivers side , front to rear , 4 , 5 , 6 ------------------------------------------------------------------- The spark plug firing order is ( 1 -4 - 2 - 5 - 3 - 6 )

Posted on Aug 11, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the diagram of sliding door chvy venture ls 2000?

I found this wiring info. There is a module that I couldn't get in the picture.
There are a couple of places that have free wiring diagrams, that I know about.

May 04, 2016 | Cars & Trucks

1 Answer

I'' installed. An after market. Radio in my 2004 impala but I can't figure out how to shut my lights than when I run an ignition wire they shut off but my memory is gone what do I do

This radio wiring diagram may help you to figure out where that wiring job went wrong. Use it along with the diagram that came the aftermarket radio to make sure that you got all the wires in the proper places. babd4abb-f638-49a7-8a71-02b937b9dc05.gif

Jul 21, 2014 | 2004 Chevrolet Impala

1 Answer

I have a 2002 ford expedition that has a problem with the turn signals. when you turn on the right signal it works properly, but when you turn on the left signal both signals on the back of the vehicle...

Get a wiring diagram from the Free portion of the Autozone site. It is a little work to separate the Help categories at the bottom of their Webpage.

I have heard of SOME 4-way flashers that are built into the turn stalks causing problems. The contact pins for the turn signals are shared as 4-way flasher pins. Try clicking the 4-way flashers off/on about 20 times and then use the left turn signal. It has been known to reseat the contact pins.

The wiring diagram I mentioned would show where the tailgate top light gets its power. One feed should go to the brake light switch for the brakes and another feed should be the flasher feed.

As I see it, you have 2 extra lights going on when you use the left turn signal. Those 2 lights are the tailgate light and right turn signal. The wiring diagram should show the places where the wires are close enough to cross. I am thinking the 4-way flasher is the only place where the top tailgate light gets flasher power; the rest of the time the tailgate light is a Brake light.

I do not want to spend your money on an unnecessary turnstalk and that is why I say to look at a wiring diagram and see if there is anyplace where the wires could cross.

Last, trailer hitch plug. All wires are bundled with left turn, right turn, and brake light in the trailer hitch plug. Corrosion could connect the terminals.

Would like to know what you found.

Oct 08, 2013 | 2002 Ford Expedition

1 Answer

1988 dodge ram wiring diagram

If you don't want to test or don't know how,then you
either have to learn or pay someone

You can get a wiring diagram at any local repair shop
with a data base,provided the data goes back to 1988

You have to test peroid if something isn't working, you
have no choice,you can not replace parts to resolve things

Why would you say wires need replacing? Repaired in places

Dec 07, 2012 | 1988 Dodge Ram 50

1 Answer

Starter replacement instructions

I do not have a diagram, but I think I can help. There will be 2 or 3 bolts that hold the starter on. Here are the steps, and its pretty easy so worry.
First, make sure you disconnect both wires from the battery. Always disconnect the negative cable first.

After the battery is disconnected, remove all the wires from the starter ensureing you remember where they go so that you hook them back up properly. If it is not simple or if it is something that I think I may not remember, I will lable them some how or write it down.

After the wires are removed remove the 2 or 3 bolts that hold the starter to the engine block. Be careful when doing this, especially if you are laying under the starter as it may be heavier then you think and you do not want to drop the starter on your head as it will cause pain and perhaps a trip to the ER to get a couple stitches!

Some vehicles have small covers you may have to remove to get to the starter, but those are just a couple bolts if your Jeep has those, which I do not think it does.

Most parts stores have bettery testers and starter testers and can tell you if they are good or bad. Generally if you try to start the vehicle and all you get are a few lights, maybe a quiet "click" noise, I would check the battery before removing the starter, but if you want to knock them both out, by all means, go ahead. If the starter is bad you will usually hear some sort of "whining" noise, but not all the time.
Hope this helps!

Nov 10, 2008 | 1995 Jeep Wrangler

Not finding what you are looking for?
1999 Ford Ranger SuperCab Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides