VW lupo cylinder head torques - 1995 Land Rover Discovery

go to VW dealer
buy the service manual
or google for free ones.

https://vwgolfmk1.org.uk/forum/index.php?page=topicview&id=big-block-injection_2%2F1-8-gti-cylinder-head

https://www.justanswer.com/vw-volkswagen/2706j-1997-jetta-torque-settings-vw-the-head-fly-wheel-big-ends.html

hi reynold.
not sure if this link will help you out but have a look.
Cylinder head torque specifications on 1973 vw bug 1600 cc Google Search

https://www.google.com/?gws_rd=ssl#q=Need+cylinder+head+torque+specs+for+16+vw+polo+classic+2000

Hope this helps

see if this link helps you..
Cylinder head torque setting for 2004 VW Jetta 2 0 Google Search

https://www.google.com/search?q=Engine+diagram+92+geo+storm+gsi&biw=1362&bih=650&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwjYzZrkhpjQAhWBfCYKHd5eCVMQsAQIGg#tbm=isch&q=Need+torque+settings+fir+vw+polo+2008+1.6i+8+valve.+...+cylinder+head+mains+and+big+ends+
Hope this helps

http://www.speedwayautoparts.com/index35.htm click on torque table and look up your vehicle

Cylinder head instructions


Cylinder head torque setting for 2005 VW Golf 1.4 FSI
Renew bolts
Stage 1 = 30 Nm
Stage 2 = 90 degrees
Stage 3 = 90 degrees

Hi

If this is the 3 cylinder Lupo then it could very well be the timing chain getting noisy.

Its around about a 3 to 4 hour job if I remember rightly, so at a VW main dealer labour costs would be over £200 ($400) plus around about £120 ($240) or so for the parts (chain and tensioner).

These are English prices though, so although I've put dollars in brackets, prices may still differ.

Just as a matter of interest, the main cause of chain stretch is lack of servicing, oil changes to be exact. If the service schedule is kept up then a timing chain will last several hundred thousand miles.

Very best regards

Geordie