Question about 2006 Chevrolet Express

Open Question

Code C0455 this code is in history

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Service stability acknowledge light is on after replacing rack and pinion

Go under and make sure you connected all the connections on the rack and make sure no pins are pushed out of the connectors and they are fully latched, replace any with broken connector shell lock tabs.

Jun 21, 2017 | Cars & Trucks

1 Answer

I would like to reset the driving history. How is this done.

Erasing the history will not correect your problem. Have the trans module scanned for codes. Look for communications errors.

May 05, 2015 | Cars & Trucks

1 Answer

Have a 2004 gmc yukon getting codes c0040, c0550,c0455,c0296 in the abs computer. Trac and abs light on as well as suspension control.

C0040 - Right Front Wheel Speed Circuit Malfunction
C0550 - ECU Malfunction - internal write / checksum malfunction
C0455 - Either:
  • A bent terminal or poor connection at the SWPS may be one possible cause; or
  • The vehicle stability enhancement system (VSES) electronic brake control module (EBCM) calibration may be the other possible cause.
C0296 - Transfer Case Delivered Torque for Stability Control System Circuit

Feb 27, 2015 | 2004 GMC Yukon

1 Answer

2008 f350 6.4 liter wrench light and reduced engine power on no codes

You need a scanner on this. Code readers won't check history codes. Every time you turn the key off the ECM/TCM resets, kind of. Meaning the ECM doesn't see a fault with the key on. But does when you start driving the vehicle. Since this happens, the codes go to history.

Feb 16, 2015 | Cars & Trucks

1 Answer

What is code D0131 on a 2006 Chevrolet Trailblazer LS?

Don't know where you came up with this one D0131 , No such code . Now if you mean a P0131 it's for a O2 sensor
DTC P0131 HO2S Circuit Low Voltage Sensor 1
Front Steering Position Sensor Circuit

The electronic brake control module (EBCM) receives multiple direct inputs from the steering wheel position sensor. These circuits include, two digital square wave input signals A and B. Phase A or B should toggle high and low every 2 degrees of steering wheel rotation. . The EBCM also receives one analog steering wheel position input on the steering wheel position sensor signal 1 circuit, and is compared to the digital circuits for fault detection. The analog portion of the steering wheel position sensor is supplied a 5-volt reference and low side return circuits from the EBCM. Ignition voltage and ground circuits are supplied directly to the digital portion of the steering wheel position sensor.

Sep 30, 2017 | Chevrolet Blazer Cars & Trucks

1 Answer

Car history

-What history...? You mean code?

Good luck


Oct 14, 2013 | Cars & Trucks

1 Answer

2001 Oldsmobile Alero Service Engine light, ABS, and Traction light keep coming on. No code, only history. Can not get the history to clear??

Only the computer can clear history codes . If the problem was fixed in about 100 ignition cycles the computer will clear this codes . Code reader . will it check Codes in the EBCM - electronic brake control module ? ABS DTC'S

Aug 18, 2017 | 2001 Oldsmobile Alero

Not finding what you are looking for?
2006 Chevrolet Express Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides