old post,,,, but others might find it useful.
in the fuse box. on all suzu.
see oper, guide for fuse info see if it show the relays
some guides, shows them as blank.
that means , its covered in FSM... factor. serv. man.
did you even look on both boxes both have labels....>????
blower fail on high?
is the fuse good, that is first not relays
this car has a HVAC control module HCM.
so the blower works in this path
fuse, > relay, >> blower power transistor module>>> HCM
the HCM inputs must be correct or i will not turn on the BPTM.
4 fuses, related. min.
and sensor inputs.
did you try a scan tool yet
to see if there ARE HCM DTC errors
location of relay
the relay is in TIPM box 2
grengo for , fuse box 2.
location 19
bottom right relay
seen here.
Hi emchugh107, I want to help you with your problem, but I need more information from you. Can you please add details in the comment box?
What problem are you having? I suspect your looking for resistor that controls fan speed and operation ? Look under dash on passenger side where ducting is and follow blower motor wires back to connection. That connection is your resistor. Removal of glove box may make it easier if you find it.
iT IS UNDER THE GLOVE AND UNDER THE SOUND PROOFING MATERIAL ON THE LEFT SIDE
REMOVE 2 PUSH PINS AND 2 7MM SCREWS ITS ON THE LEFT
AFTER ALL THAT I JUST GAVE THE MOTOR A WHACK AND ITS BEEN RUNNING EVER SINCE ,GIVE THAT A TRY
×