Ignore the spam
no year car,wow.
first off , the owners manual told you 2 things
what means and how it works and what to do.
the o/d is over drive, in overdrive it glows
if the lamp flashed the transmission has problems
next step is scan it.
or get car serviced.
ever read the OP guide in the glove box.
Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals
SOURCE: missing and check light problem
have them check the timming belt. also have autozone scan for free to check the codes good luck
SOURCE: engine warning light stays on my suzuki grand
It means there is a fault stored in the computer memory that needs to be identified and fixed.
Have the code read or take it to advance auto and they will lend you the reader so you can plug into the diagnostic port under the dash and read the code.
The code reader can then be used to reset the check engine light and turn it off.
SOURCE: suzuki ignis 2002 oxgen sensor functions
It gets pretty hot in there, and although hardly any manufacturers specify replacement intervals for oxygen sensors, they play a critical role in providing the ECM with acurate data for best running performance/economy. Change it, as the savings in NOT changing it will be soon eroded by increased fuel usage.
SOURCE: when i am driving my suzuki ignis
I have a 2001 Suzuki Ignis and I have a similar problem. When I start the engine 5 beeps are heard and the hazard lights turn off and on with each beep. Also after I have been driving for about 45 mins 3 beeps are heard and the hazard lights turn off and on again. However my engine does not stop running. I have asked people about it and they think that it has something to do with a lose wire in the security system? Any help would be greatly appreciated!
676 views
Usually answered in minutes!
×