When I push on my brakes the tail lights go out and my brakes don't work
SOURCE: tail lights dont work
Replace the bulbs.
The bulbs will have two seperate elements in it which is why the brake light works.
Take the bulbs out and you will see the seperate elements.
SOURCE: fuse blows when brake is pushed. No brake lights.
If you have a trailer harness connector,check pinched and shorted connector,if not,check for a burnt and shorted light socket or pigtail
SOURCE: Subaru outback wagon tail light not working off
There are several components of your 1997 Subaru Outback that can cause your tail lights to stop functioning correctly. To help pinpoint the cause of the problem, it would be very helpful to also check your front marker lights. If the marker lights are working, then we know that the problem is not the headlamp switch or the tail and illumination relay (located in the fuse and relay box).
The components to check are:
> Fuse #23 (20 Amp) in the Main Fuse Box.
> Fuse #5 (10 Amp) in the Fuse and Relay Box
> Tail And Illumination Relay
> Headlamp Switch
SOURCE: On my 2008 Subaru Outback,
Did anyone find a solution, or a good lead on the problem? Just had the bumper replaced after a small accident (tire dealership) and I'd rather not go hunting if it's something simple.
SOURCE: 2009 Impreza 5-door left tail light and turn signal don't work .
first of all check and confirm whether in the fuse box separates the left from right side and see for blown fuse. or check for any disconnection on the rear light
Testimonial: "Thanks, John. I was looking for something deeper than what it was."
216 views
Usually answered in minutes!
×