Question about 2003 Ford Taurus

1 Answer

How to replace spark plug well o-rings 2003 ford taurus 3.0 durtec

Oil in spark plug wells

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Ford Master
  • 450 Answers

Buy valve cover gasket kit with plug tube seals .. remove valve cover.. Clean everything .. replace seals replace valve cover gasket and reinstall valve cover. Clean sparkplug wires connectors.. Try Rockauto .com for this part about $25. about 1/2 price of local auto parts store. Tighten Valve cover screws to correct torque specs.. for best job.

Posted on Jun 01, 2014

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Leaking oil from sparkm plugs


Oil leaking into the spark plug wells is an indictor of a fairly serious problem that should be inspected and repaired immediately. It is almost always due to a failing gasket or O-ring but can also be the result of a failing piston or worn valve guides. Oil is leaking into spark plug well Inspection Service Cost YourMechanic

May 12, 2016 | Cars & Trucks

2 Answers

How to fix oil from getting in the spark plug chamber


Is this oil in the plug wells or the cylinder?

Oct 02, 2015 | 2004 GMC Envoy

2 Answers

Oil in most of my spark plug ports!


The fault is due to the valve cover gasket passing oil into the spark plug wells. There are circular seals under the valve cover around each spark plug well opening. These spark plug well seals come with the valve cover gasket set.

Apr 06, 2013 | Infiniti G35 Cars & Trucks

1 Answer

Missfire after filling oil


if you poured the oil in to fast oil might have passed threw the pcv system and flooded out a cylinder with oil or its a engine with the spark plugs in the center of the valve cover and the seals in the center leak oil and when the oil was added it drained oil into the spark plug wells and shorted out the spark plug

Sep 02, 2012 | Ford Cars & Trucks

2 Answers

My car smells like its burning oil, and there is oil in my spark plug wells. Guy at auto parts store says I need to replace oil gaskets that go around spark plugs. Is this a valid diagnosis and if so is it...


As far as I know spark plugs only have a metal type washer to seal, and there is no other oil seal needed. I have know oil to leak from rocker cover and fill spark plug wells, but tis also often covers engine. Burning oil smell couldbe from oil going onto the outside of hot engine. Check oil loss via dip stick. Clean all oil from outside engine to find out sites of leaks. Hope this helps.

Sep 22, 2017 | 2004 Volkswagen Jetta

2 Answers

Found oil on the four spark plugs of a 2000 dodge neon. What would cause this?


if there is oil on the plugs you might need valve stem seals or rings in the engine

Jul 11, 2010 | 2000 Dodge Neon

2 Answers

Oil in the spark plug well on one plug/ back left


you are going to have to replace the valve cover gasket, the seal around the plug wells is leaking.

Sep 16, 2009 | 1993 Acura Legend

2 Answers

1989 tOYOTA CRESSIDA sAPRK PLUGS WELLS. OIL IN THE SPARK WELL


The 7MGE has 2 separate valve covers/gaskets with 8 screws holding each cover that will loosen over time.
Find the phillips screws holding on the covers and retighten snugly by hand do not overtighten!
Pull plug boots/wires by the boot not the wire and use paper towels or rags on a long screwdriver etc to absorb the oil from the wells.
Carefully clean plug boots with spray brake cleaner (avoid spraying anything but the boot) and let dry.
Apply 100% silicone grease to inner boot before reinstalling to allow future removal without damage.
If your engine is particularly dirty you may need to remove the covers first and clean all mating surfaces then reinstall.

Feb 24, 2009 | 1989 Toyota Cressida

2 Answers

Oil around 1 spark plug well.


More than likely you have a leaking valve cover gastet. Not a head gasket.

Dec 09, 2008 | 1999 Volkswagen Jetta

1 Answer

Spark plug well filling with oil.


a new valve cover gasket and o-rings around the wells should have cured this...did you clean the old o-rings off the valve cover completely before installing new ones? this is a common problem with these models.....i would re-check my gaskets and mateing surfaces. valve cover gaskets and spark plug well o-rings are relatively low cost. the spark plug is tight, correct? write back with an update!

Oct 16, 2008 | 1992 Honda Accord

Not finding what you are looking for?
2003 Ford Taurus Logo

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...