Engine not failed oil pressure good engine ticking think it is rod bearings how do you replace on 1997 chev Blazer
hold up rod bearings were did you get that?lets take it from the top.camshaft lobs move lifters on rotation,which lifters move push rods,push rods push valves up and down,which other side of valves push up and down valve stems,which open and close exhaust and intake stems.ok now were clear on that to see your push rods.take off your valve covers on side with tick.1.check for valve loosness.need a feeler gauge for this and specs for you truck to do this.because ticking is mostly associated with valve loosness or to tight.2.if rod is bad loosin valves but not off and inspect the rods for bends.on a flat surface.replace if bend.also make sure they to go back in same place.and repeat step 1.finally noise continues need to take in and checked possible internal damage.
×