1998 Jeep Wrangler Logo

Related Topics:

A
Anonymous Posted on Jun 06, 2014

Where do I find the engine number on a jeep tj 1998 wrangler?

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Aug 12, 2008

SOURCE: 2004 Jeep Wrangler TJ won't

if your jeep has a harder time starting when its warm as well, i would say the throttle position sensor is bad, or dirty. mine does tah same thing. i just live with it. its cheaper than replacing it.

Ad

Anonymous

  • 46 Answers
  • Posted on Dec 26, 2008

SOURCE: how to replace a jeep tj fuel tank?

I would be really careful with doing this repair as this is very dangerous. You need to relieve the fuel pressure by pulling the fuel pump fuse and starting the truck. Drain the tank with a siphon pump. Remove any exhaust or other parts that are in the way, loosen the straps and support the tank with a floor jack and a block of wood. There are several hoses, and a few wire connectors to disconnect and you may want to replace those hoses while you're down there. Once you put the new tank in, reconnect the electrical and hoses, raise the tank and strap it back up. Put anything else back together you took off the truck.
Personally, I would take this in to get fixed as this is dangerous work (I did mention that). I you do this anyway, use your head and buy a proper container to hold the gas in , as well as jackstands and a class "B" fire extinguisher. Disconnect the battery and don't smoke or use a drop light under the car, and I will not accept responsibility for this.

Anonymous

  • 323 Answers
  • Posted on Jun 08, 2009

SOURCE: 2006 jeep wrangler check engine light came on it

There is a software update for the PCM that addresses this issue. TSB 18-028-06

Anonymous

  • 28 Answers
  • Posted on Sep 06, 2009

SOURCE: engine keeps missing. unknown codes

Code 1682 indicates low battery voltage. This could be a problematic alternator, which would likely cause misfiring. Autozone should be able to check this for you for free.

Code 1391 indicates the computer can not see the crank or cam sensor signal. This would likely be a result of the misfires.

Code 0320 indicates the crankshaft position sensor reference signal could not be found while the engine is cranking.

All of these issues point to either a cam/crank sensor malfunction or a charging system problem, either or both of which could cause the misfiring.

ZJLimited

ZJ Limited

  • 17989 Answers
  • Posted on Sep 24, 2009

SOURCE: anyone know where the engine number is on a jeep

2002 Jeep Wrangler 4WD 2.5L SFI 4cyl

bce93b5.jpg

Fig. The engine serial number is located at the right front side of the engine block (models 1997-2005)

I hope help you wth this; good luck (remember rated this help).


Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where is serial number on motor

why not say why you need this, we don't in usa, ever. but?
1998, USA? JEEP TJ it is.
what engine?
the FSM USA< shows on the first pages, how to find 2 things,
VIN
and engine number.
so there you have it,
but post engine free.

so here is the free manual (posted 100s of times)
2.5 or 4.0L engines. vin P or S?

here is your answer, for all AMC engines
http://street2mud.com/webfiles/AMC%20Engine%20codes.pdf

chrysler took over in 1987, so maybe the engine serials
are same after the block total update in 1996 .

why not say need for serial;>?

let me warn you, some engines sold to some countries
have no serial. at all. so... no country stated, NO JOY ! x1000000 times. asked here.
0helpful
1answer

1998 jeep tj oil capacity

Depends on which engine, and normally one would use the dipstick to tell when it is full.
0helpful
1answer

I have a 98 TJ 2.5, does anyone know if it has another numbers in the chassi? (except the three plates inside the car) tnanks

hi no there is only the ones on the inside the layout should be like this for your one


1 Country of Origin 1 = United States 2 Make J = Jeep 3 Vehicle Type 4 = MPV 4 Gross Vehicle Weight Rating E = 3001-4000 lbs.
F = 4001-5000 lbs. 5 Vehicle Line Y = Wrangler 4×4 6 Series 1 = Sport
2 = SE
4 = Sahara 7 Body Style 9 = Open body 8 Engine P = 2.5L Unleaded Gasoline
S = 4.0L Unleaded Gasoline 9 Check Digit 0 through 9, or X 10 Model Year W = 1998 11 Assembly Plant P = Toledo #2 12-17 Vehicle Build Sequence Six Digit Number

incase the picture did not come out

1 Country of Origin 1 = United States
2 Make J = Jeep
3 Vehicle Type 4 = MPV
4 Gross Vehicle Weight Rating E = 3001-4000 lbs.
F = 4001-5000 lbs.
5 Vehicle Line Y = Wrangler 4×4
6 Series 1 = Sport
2 = SE
4 = Sahara
7 Body Style 9 = Open body
8 Engine P = 2.5L Unleaded Gasoline
S = 4.0L Unleaded Gasoline
9 Check Digit 0 through 9, or X
10 Model Year W = 1998
11 Assembly Plant P = Toledo #2
12-17 Vehicle Build Sequence Six Digit Number

hope this helps.
3helpful
1answer

What type of transmission do i have?

Your Wrangler is a YJ and the model is an "S". A Wrangler manufactured in 1987 through 1995 are all YJ's and then from 1997 through 2006 are all TJ's. The new Wrangler models are dubbed JK's.
0helpful
2answers

1998 Jeep Wrangler TJ Headlights working intermittently

I have a 97 TJ and the headlights wouldn't come on but the parking lights would. Funny thing was that if I pulled the brights to flash someone, the brights would work. I took out the old headlight switch ($26 at Checker) and they work again. When I pulled the switch there was one connector that seemed to be corroded. Hope this helps
Not finding what you are looking for?

147 views

Ask a Question

Usually answered in minutes!

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...