SOURCE: where is pvc for 97 hyundai elantra
The PCV valve is located on top of the engine behind the intake. Little white piece with a black hose running out of it.
Please rate if I helped or solved your problem
SOURCE: wheel bearing
The front 'hub' bearing is 'pressed' out. You have to remove the steering knuckle from the vehicle and using a hydraulic press, replace the bearing by pressing out the old one and then pressing in the new one.
SOURCE: need fil for error code P2626 Hyundai Elantra GLS
P2626 O2 Sensor Pumping Current Trim Circuit/Open (Bank 1 Sensor 1)
I'll sure this has to do with a faulty O2 sensor. This sensor is usually
located around the header of your car, or down more on your exhaust.
Try disconnecting your battery for 30 mins, hook it back up, and start
your car again. This will erase the error. See if it comes in again.
Hope this help (remember rated this post).
SOURCE: Hyundai Elantra GLS 2003 starter does not work
it can if you have the proper tools and a little patience its not very hard at all it may be a little snug i cant remember off hand where the starter is located on that car but its relatively an easy fix.
SOURCE: can i adjust the timing
On the 1997 Hyundai Elantra Ignition Timing is computer controlled. It is non-adjustable.
87 views
Usually answered in minutes!
×