SOURCE: rear hub removal on a dodge 2004 ram 3500
REMOVE THE RUBBER PLUG IN BACKING PLATE AND ADJUST E BRAKE SHOES DOWN TO REMOVE ROTOR
SOURCE: serpentine belt diagram 2007 dodge 5.9 3500
get the belt routing from the local dealer.
they will not charge alot of money for a reprint from the factory service manual.
also
dayco belts come with the belt routing on the box.
SOURCE: how do you remove the flywheel when replacing the clutch
Take trans out, clutch out, and remove the flywheel bolts.
SOURCE: cannot remove rear rotor
you can also spray a good amount of W-4 or any kind of rust solvent where the disc sits on the hub. Let it stay for a while make sure it is soaked, make sure the car is in Neutral not in park!! What you would want to do then is hammer with a 4LBS plastic mallet from the inside out of the rotor by rotating it in three to four different positions. Repeat this process a couple of times and it will come off. Make sure there is no locking washer on the wheel bolts, if so you will have to cut them off. Trust me i just changed mine two weeks ago and it worked fine!
SOURCE: how to remove the rear brake rotor on a 2006 dodge
Single rear wheel - Remove both caliper bolts.. remove caliper and pads.. remove rotor.. they are usually rusted on pretty good.
Rear Dually- the rear rotors are mounted with the hub assembly.. you must first remove the rear axles.. then remove nut holding load on bearings.. then the rotor and hub assembly will come off as one unit.. removed rotor from hub..
109 views
Usually answered in minutes!
×