Transmission not shifting
Hi there:
I guess that its a auto trans, then you check the fluid level in neutral and adjust as needed. But you have another issue thats causing it not to shift, and that is most likely the Govener Pressure Sensor and Govener Pressure Transducer failing. There giving the wrong voltage feed back signal and the controller isn't allowing the trans to shift. Both the sensor and transducer are located on the valve body and aren't hard to replace.
Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.
Thank you for using FixYa, have a nice day.
×