Gm engine casting numbers

SOURCE: Programming a 2006 Pontiac Gran Prix Keyless remote

The rke on 06 pontiac only can be programed using a diagnostic scan tool or Tech 2.
Conect the scan tool to the vehicle. turn key to on position.
Select 1 body, 2 them select special funtions
3 slect program key fob,
4 select the number of key fob you want to program.
5 Press and hold the lock and unlock key simultaneous. about 15 seconds
The power lock cycle confirm the remote is programed.

SOURCE: obd1 scan tool will notaccess

A couple of ways to check and see if the computer is ok first:
check engine light must come onwith they in on position
The fuel pump must run for two (2) seconds with the key ON
There must be a 5 volt reference at sensors like map, TPS
Must communicate with scan tool
The ORANGE wires at the computer are you power input wires one has 12V all the time this is your KEEP ALIVE MEMORY
one is 12 with the Key on you MUAT HAVE VOLTAGE AT BOTH
Check the computers Ground most are out under the hood and are brown wires
Try the GM TAP TEST this is a factory authorized test with the computer connected and you verified all of the above SLAP the computer with the open hand firmly not too hard but firm see if anything changes,
Do not disconnect the battery you will erase all the codes!
Please contact me if you need any additional information.
If you find the information provided helpful please give me a good rating
www.aceautomotive1.com

SOURCE: 2009 Pontiac Vibe speedometer inaccurate

Because pontiac vibe is a toyota matrix clone and both are made in two different places/countries I guess pontiac ( better looking one - new model :) has different size tires . Speedometer is calibrated to standard size tires . If you have smaller or bigger you will see some differences. Of course it may be few other things but let's start with the simplest one. Good luck

SOURCE: 2000 Pontiac Radio Locked

look in the owners manual... pass code should be listed. the dealer is supposed to unlock the unit befor the batt is dissconected. if you cant find in owners manual. take it back to them. its there fualt its locked!!

SOURCE: GM 3.8 liter supercharge v6 firing order 2000

For the 2000 Pontiac Grand Prix:
I do not know if you have the 3.1L V6 or the 3.8L (including Super Charger) V6; however I have included both below...

For the 3.1L V6:
Firing Order:
1-2-3-4-5-6
Cylinders:
......(back).......
'...1....3....5...'
____________
'...2....4....6...'
.......(front)
Ignition Coil Connections:
.'.5..2.'..'.3..6.'..'.4..1.'


For the 3.8L V6 including the Super Charger:
Firing Order:
1-6-5-4-3-2
Cylinders:
.....(back).......
'...2....4....6...'
____________
'...1....3....5...'
......(front)
Ignition Coil Connections:
(back)
o 6
o ---3
___
o 2
o ---5
___
o 4
o ---1
(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact us at FixYa.com!