Cars & Trucks Logo

Related Topics:

Scott Forman Posted on Jun 25, 2014

How to replace the tps on a 1999 dodge 2500 v10

How do i replace the tps

5 Related Answers

Anonymous

  • 4 Answers
  • Posted on Feb 04, 2009

SOURCE: 2001 dodge 2500 v10 has low idle

On my 06 v10 there is a idle adjustment screw at the linkage on the throttle body.
clean air filter
clean sensor in the air intake ram
try some 93 octane

Ad

Anonymous

  • 1 Answer
  • Posted on Jun 26, 2009

SOURCE: 1999 dodge cummins 2500 front axel seals

you need to pull off wheels,brakes, rotor /unit hub bearing, both axles and intermediate shaft, as well as the vac disconnec ton the front axle tube. if only the right side leaks then only then only pull the right axle and intermediate shaft and vac disco. it is a trick with a miller tool to replace the seal. the left side seal is inside the diff and the carrier has to come out to replace it. pete

kirtec auto

  • 1348 Answers
  • Posted on May 18, 2010

SOURCE: 2001 dodge ram 2500 v10 oil pressure drops to 0 then back up

you need to put an oil pressure gauge on it and see what happens.what you will find is that the sender unit is no good.

Anonymous

  • 3092 Answers
  • Posted on Jul 22, 2010

SOURCE: Where is the fuel filter located for a 95 dodge

It's in the fuel tank, no service, only gets replace if fuel pump goes bad, fuel filter is part of the fuel pump, comes as one unit only.

Anonymous

  • 1 Answer
  • Posted on Jun 23, 2011

SOURCE: 1999 Dodge Ram 2500 Diesel 4x4

check engine light on code says speed senceor this sounds right sents speedo not working so i changed both the sensores but still check engine light on and speedo and cruise not working

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to remove tps on a 1999 dodge 2500 v10 ram

fsm covers this.
on some cars its not removable, newer cars.
most older cars, 1 conn, and 3 screws.
did you look? yet?
the best question, is how to calibarte it.
there are 4 ways. on all cars (not new)
1: auto learns it
2: feller gauges.
3: set it to 0.5v or 1v.
4: on some RPITA cars, its factory scan tool time.

the fsm cover this. totally
or alldata.com

login and read, it is there.
1helpful
1answer

I own a 96 dodge ram 2500 v10. i want to replace the rear end with a disc brake rear end. what will fit without much hastle.

first you need to find out what has rear disc brake that is rear wheel drive once you find this just measure one the rigth length & same shock,leaf spring hook ups. you maybe have to change master cylinder too
4helpful
1answer

2001 dodge ram 2500 v10 oil pressure drops to 0 then back up

you need to put an oil pressure gauge on it and see what happens.what you will find is that the sender unit is no good.
0helpful
1answer
0helpful
1answer

Power steering

With the engine off, fill the reservoir with fluid and turn the wheels slowly lock to lock a few times. Top off the fluid and start the engine. If it still whines a bit, turn the wheels back and forth a couple times and then shut it off. Let it set about an hour or so until the fluid looks a solid color again.
Not finding what you are looking for?

283 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...