1996 Chevrolet Camaro Logo

Related Topics:

A
Anonymous Posted on Jun 26, 2014

Replace motor 1995 camaro 3.4 auto. How many hrs and from the top or bottom by myself ?

1 Answer

maximus3319

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Cheetah:

An expert who has answered 20 or more questions within one hour.

  • Expert 120 Answers
  • Posted on Apr 01, 2015
maximus3319
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Cheetah:

An expert who has answered 20 or more questions within one hour.

Joined: Jan 23, 2009
Answers
120
Questions
0
Helped
19189
Points
279

Bottom, and about 60 hours by yourself

4 Related Answers

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Dec 04, 2008

SOURCE: how remove the panels to replace the rear hatch lifts 1995 camaro

You don't have to remove the panels, the lifts are held on with U clips at each end of the gas cylinder

Ad

Anonymous

  • 1450 Answers
  • Posted on Jan 13, 2009

SOURCE: 1995 camaro, change engine

best to drop out the bottom. drop the whole cradle down and swap what you need too I have never seen one come out the top on thse body camaros

Anonymous

  • 319 Answers
  • Posted on Mar 19, 2009

SOURCE: 1995 camaro z28 convertible top won't go up

parking brake contains a safety switch

Anonymous

  • 713 Answers
  • Posted on Sep 27, 2009

SOURCE: starter installation on 1995 z 28 camaro auto

This is the old square body style car correct. Not hard to do, disconnect the positive battery cable from the battery. Pull the car on ramps and set the emergency brake or put on stands. Crawl under the car on the passenger side and disconnect the wires from the starter one should be a 9/16 and the other is probably a 3/8. Remove the rear support bracket if it has it should go from the rear of the starter to the engine. Then remove the two starter bolts possibly a 9/16 also careful to pay attention to any shims that might come out of it then pull the starter out of the bell housing and replace with new one and reconnect everything.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
3answers

How do I get my factory temp gauge to work on my 00 S10 I swapped motors from 4.3 to 383 stroker carb

u will need piece of brass pip and brass T to put in the spot where the temp sender is
0helpful
1answer

How much does it cost to have someone replace pushrods in a 2001 Camaro v6 3.8l

About 3 hrs start to finish if only the pushrods
But the extra costs and time for the damage caused by the faulty parts could take 30-40 hrs to repair
0helpful
1answer

How to replace an oil pump on 1994 3.4Lcamaro?

can I replace the oil pump with out removing the motor in a 94 Camaro 3.4
0helpful
2answers

I have a 95 z28 Camero with a 5.7 liter engine and need to replace the plugs and wire. I am wanting to do this myself and need a diagram of the motor

I did mine with MSD wires. Unless you have incredibly small hands, youre going to have to put it on a lift and take out park of the exhast. But you still will have trouble, best bet is to drop the motor. Its alot of work but totally worth it.
0helpful
1answer

Hi i have a question about my 1995 chev i dont now if it can be the fuei injector becuase it smell like gas in the motor

If it's coming from the area of the injectors you may have a leaking one. If so try and determine which one, pull the plug off, remove the injector. Your local auto parts should have a seal kit. Replace seals (o-rings), and replace injector.
0helpful
1answer

Starter installation on 1995 z 28 camaro auto

This is the old square body style car correct. Not hard to do, disconnect the positive battery cable from the battery. Pull the car on ramps and set the emergency brake or put on stands. Crawl under the car on the passenger side and disconnect the wires from the starter one should be a 9/16 and the other is probably a 3/8. Remove the rear support bracket if it has it should go from the rear of the starter to the engine. Then remove the two starter bolts possibly a 9/16 also careful to pay attention to any shims that might come out of it then pull the starter out of the bell housing and replace with new one and reconnect everything.
0helpful
1answer

1995 camaro just bought the car driver side

sounds like nu window motor replacement time if you get voltage to motor ( test light ) its motor
0helpful
1answer

1995 camaro z28 convertible top won't go up

parking brake contains a safety switch
0helpful
1answer

1995 camaro, change engine

best to drop out the bottom. drop the whole cradle down and swap what you need too I have never seen one come out the top on thse body camaros
Not finding what you are looking for?

57 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...