My hilux want wind over or start due to my immobilize how can I bypass it

If you have gone to the dealership, they could have cut you a key based on the VIN Number. Then you wouldn't have needed an ignition lock. I hope your new key has a chip in it? You need to reset the immobilizer.

When in the car, check the antitheft light to see if it is on; if on, it means the immobilizer is on. Use your key to turn on the car but not start the engine.The key should be in the position for 10-15 minutes, during which most of the car systems are running, which will also allow the antitheft system to reset.

https://www.google.com/search?q=toyota+hilux+immobilizer+reset

..

All Toyota engines utilize one of the most sophisticated vehicle Immobilizer systems on the market. There is no known way to bypass these systems. What this means, is that even if you somehow successfully installed a used D-4D engine into your vehicle, the ECU would be locked and not allow the engine to run as the ECU needs to be programmed to your specific vehicle. It's a common misconception that simply having a key from the donor vehicle is a method of bypassing this programmer. All Toyota D-4D ECU's use volatile memory chips for their immobilizers which means that if the battery power is cut to the ECU for any considerable length of time, the ECU will have to be re-programmed.

You can't bypass it because the immobilizer is controlled by various modules and is there SPECIFICALLY to stop what you are trying to do. You have to fix the problem not find a away around it. In your case, it should be easy. Do the security system reset.

https://www.google.com/search?q=hyundai+i20+security+reset

If the unit is broken, you need a new one, or the old one repaired and fitted by the dealership or an auto-electrician.
..

There is only one way to bypass security. There is a wire that has to be cut, while the engine is running. This puts the ECU in default mode and will start and run the car. After the security is set, it is to late. You will have to have it scanned for codes and have it fixed. EVEN aftermarket stuff doesn't bypass it. It just sends a signal for the ECU to read.

The motor can be replaced without touching the immobilizer system. There may be no problem with the immobilizer system as it only turns off power to the fuel pump or ignition spark.
better yet just re-seed the immobilizer ECM with the dealer

Click the related link below:---
Immobilizer override and bypass? http://whatisbyme.blogspot.in/2012/05/2012-toyota-hilux-sr5-immobilizer.html

-----------
Is It Possible Immobilizer Bypass http://whoisbyme.blogspot.in/2012/07/immobilizer-bypass.html

--------------
How to bypass immobiliser on Vehicle? http://technoanswers.blogspot.com/2012/01/how-to-bypass-immobiliser-on-rover-200.html

----------
Mitsubishi ECU Reflashing http://repairhelpcenter.blogspot.com/2012/11/2003-mitsubishi-ecu-reflashing.html

--------
These will help.
Thanks

There are few help links related to these issue.click the link below and go through its troubleshooting and procedure.

Immobilizer override and bypass? http://whatisbyme.blogspot.in/2012/05/2012-toyota-hilux-sr5-immobilizer.html


------------
Immobilizer Bypass http://whoisbyme.blogspot.in/2012/07/immobilizer-bypass.html
-------------- How to bypass immobiliser on Rover 200? http://technoanswers.blogspot.com/2012/01/how-to-bypass-immobiliser-on-rover-200.html

---------
These details will help.
Thanks.

Click the help link below,in related to toyota Hilux.

Toyota Hilux Surf Fuse Box Diagram? http://technoanswers.blogspot.in/2012/06/toyota-hilux-surf-fuse-box-diagram.html

----------
How to lower fuel pressure on Toyota Hilux? http://schematicsdiagram.blogspot.in/2012/02/how-to-lower-fuel-pressure-on-toyota.html

----------
2012 Toyota Hilux SR5: Immobilizer override and bypass? http://whatisbyme.blogspot.in/2012/05/2012-toyota-hilux-sr5-immobilizer.html

----------
2006 Toyota Hilux: Programming New Key? http://technoanswers.blogspot.in/2012/04/2006-toyota-hilux-programming-new-key.html

----------
These details should help.
for more help.
keep updated with more details.
Thanks.

For immobilizer reset procedure go through the link mentioned below.
Click the link:---
Immobilizer override and bypass? http://whatisbyme.blogspot.in/2012/05/2012-toyota-hilux-sr5-immobilizer.html

------------
How to bypass immobiliser? http://technoanswers.blogspot.com/2012/01/how-to-bypass-immobiliser-on-rover-200.html

----------
This will help.
Thanks.

An immobilizer bypass is an electrical circuit which allows current to flow to whatever component is starved of current to keep the engine from running (usually the coil). The immobilizer opens the circuit to the coil, the immobilizer bypass closes the circuit to the coil.

If you didn't install an immobilizer circuit, then you don't need the bypass. There are probably instructions you missed in the manual explaining the immobilizer circuit.