Moments of 2.8 AAH - 1990 Audi 100

call a local auto parts store and ask them if they can provide you with one for that old of a car

Have you plugged in an OBDII reader to get a list of trouble codes?

Change the fuse. Aah, which fuse, what amperage and where are they located? Well, you didn't state what truck, model, or year, so we can't answer that.

Please click the Comment link to respond with useful information.

Bad computer.

AAH the three amigos. Yip thats freelander doing its thing. Old problem. Never solved mystery. The only option is to take your vehicle to an auto electrician and let him go through every single wire, wheel sensors fuses etc. Its thee most common cause of freelander. most likely even the electric brake unit being clogged up. Its one of thee most annoying things on your dash. I have gotten used to it being on and dont worry about it.

Timing belt routing diagram for 1995 Audi A6 Quattro Sedan (4A2) V6-2.8L (AAH)

I can not insert the picture here because bad page. Send me your e-mail address, and I will send you back the picture.

Hi there, I have Audi 500se south Africa = to Audi 100 2.8 AAH engine 1994 model it suddenly Vanished the ON sign when I turn the ignition to ON position but it still cranks and almost every thing functions apart from it still no voltage from computer box to crank sensor and module. I checked my fuse box n all fuses are OK, can someone plz help me to find ON?

We will star a list of what is good.and what controls spark
1. crank sensor .you done it
2.ignition control module. located on the center of bulkhead,behind intake air hose
3.coils. you tested it.
4.ECM located under passenger side foot well

ECM no you got fuel,so lets leave it out
cranksensor okay you replaced it
ICM ignition control moduel.
no spark you cover everthing. has to be a loose or no contact connection somewhere, you covered it all.you might want to tap on the ecm., or check the fuse for power to junction the ones in the hood area those can blow and not give power to ignition system

It is necessary to replace rings on pistons.