Where is the throttle pedal sensor for a 2002 Chevrolet silverado
SOURCE: need schematic for location of ECM on 2002 Chev Silverado 5.3L GAS ENGINE
Please use this link :
http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152801b6773
Good luck...
SOURCE: where is the crankshaft sensor located on a 1998
The Crankshaft Position Sensor (CKP) is located at the lower front of the engine on the engine front cover, also called the timing cover. Through a use of magnetic pulsation, the CKP sensor provides the PCM (control module) with a crankshaft position signal. The PCM uses that signal to determine the spark sequence (firing order) for each cylinder. It also uses the signal to precisely control ignition timing and calculate engine speed, etc. Easy fix and clean the area out first with brake cleaner before working around that area and take care not to break the tab on the wire harness that connects to the crank sensor. Good luck
Testimonial: "That was fast,simple and easy to understand. Thank you very much."
SOURCE: WHERE IS THE OIL SENSOR LOCATED ON A 5.3 CHEVROLET
these chevs are known for oil pressure switch going bad its located on theback right side of the engine it is replace able without having to remove anything u will need a mechanics mirror to see it
SOURCE: where are the knock sensors located 2002 chevy
The knock sensors are under the intake manifold, inside the valley cover. You have to remove the intake manifold in order to access them.
SOURCE: 2002 chevrolet silverado 1500,4.8 engine.. were
There's two knock sensor's, and there under the in-take, on top og the engine, when the knock sensor detects a knock on the engine block, it will send a signal to your compute to adjust the engine timing.
Testimonial: "Thanks, but is it something that i would need to fix soon?"
239 views
Usually answered in minutes!
×