When starting the car it will try to turnover but the fuel only reaches the fuel lines and stops not getting into the cylinders and having no spark
Camshaft or crankshaft position sensor is defective. You have one of these sensors, but not both of them.
SOURCE: 2004 Alero...Car will not start now. Changed fuel
did you check the ICM (ignition control module) that's what the coil pack sits on. Inspect if for wire damage and you can remove the ICM and have it tested at Auto Zone or Parts Source free of charge.
Thank you for using FIxya and good luck
Testimonial: "thanks for the advise. I took the ign mod.to auto zone and auto eletical shop and both cannot check it. Says it works or it dont..still wont fire"
SOURCE: cranking fine, getting fuel but not firing,2.2
the plugs are located under the cover that runs across the top of the motor i think it is about 2-3" wide,also you might check the plugs to make sure they are getting spark.
80 views
Usually answered in minutes!
×