Question about 2004 Chrysler Voyager

Open Question

54 reg 2.8 cdi no ignition vehicle will not start

2.8 cdi put key in ignition no lights no ignition no alarm etc

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
kel1guy2002

Kelly

  • 3740 Answers

SOURCE: my voyager wont start it seems the alarm has stuck

This may sound a bit simple but check the starter solenoid function by running an external wire to the thin wire terminal from the positive post on the battery.

If the starter does nothing then the starter is bad.

What your describing is a typical solenoid / starter problem. Given the car is now 10 year old, it is quite possible that either the solenoid or starter has failed.

Thanks for using FixYa!

Kelly

Posted on Feb 15, 2010

Ad

Anonymous

  • 1 Answer

SOURCE: my voyager wont start it seems the alarm has stuck

but in my car it start with jump and again if i dont start for 24 hrs. battery gets dead. every time if i dont use my car for 24 hrs i need to jump start my car

Posted on May 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How do i reset the alarm on my 2003 Chevy Trailblazer...I can't stay my truck.


Hello Narisol,


Excerpt from the 2003 Owners Manual.


Passlock

Your vehicle is equipped with the Passlock theft-deterrent
system. Passlock is a passive theft-deterrent system.
Passlock enables fuel if the ignition lock cylinder is turned with a valid key. If a correct key is not used or the ignition lock cylinder
is tampered with, the fuel system is disabled and the vehicle
will not start. During normal operation, he SECURITY light
will turn off approximately five seconds after the key is turned to
RUN. If the engine stalls and the SECURITY light flashes,
wait about 10 minutes until the light stops flashing before trying
to restart the engine. Remember to release the key from START as
soon as the engine starts. If the engine does not start after
three tries, the vehicle needs service. If the engine is running and the
SECURITY light comes on, you will be able to restart the engine
if you turn the engine off. However, your Passlock system is not
working properly and must be serviced by your dealer. Your vehicle is not protected by Passlock at this time. You may also want to
check the fuse. See Fuses and Circuit Breakers on page 5-85.
See your dealer for service. In an emergency, call the M
Roadside Assistance Center. See Roadside Assistance Program on
page 7-5.


Excerpt from the 2003 Owners Manual.

Testing the Alarm The alarm can be tested by following these steps:
1.
From inside the vehicle, Iower the driver's window and open
the driver's door.
2.
Activate the system by locking the doors with the power door
lock switch while the door is open, or with the remote keyless entry transmitter.
3.
Get out of the vehicle, close the door and wait for the SECURITY light to go out.
4.
Then reach in through the window, unlock the door with the manual
door lock and open the door. This should set off the alarm. When
the alarm is set the power door unlock switch is not operational.
If the alarm does not sound when it should but the headlamps flash, check to see if the horn works. The horn fuse may be blown. To
replace the fuse, see Fuses and Circuit Breakers on page 5-85.
If the alarm does not sound or the headlamps do not flash, the
vehicle should be serviced by your dealer.

Jul 26, 2016 | 2003 Chevrolet TrailBlazer

1 Answer

How can i find the anti theft reset button on 2006 taurus


this is for a 2003, might work.

1
Press the unlock button on your vehicle's key fob to deactivate the alarm. If you've misplaced your remote for the car, use the PATS programmed key to unlock the driver's side door. Then, put the key in the ignition and turn the key to the "on" position. The vehicle's battery should be on, but the engine shouldn't be running.

2
Locate the override button on the alarm box, beneath the driver's side of the dashboard. Press the button and hold it in until the alarm beeps one time. The LED light for the alarm should stop blinking, indicating the anti-theft system is disabled.

3
To reset the vehicle's alarm, put the PATS programmed key in the ignition and turn the key to the "on" position. Press the override button. When the alarm resets, it chirps two times and the LED light begins blinking.

Jun 13, 2016 | 2006 Ford Taurus

2 Answers

How do I disarm anti theft device on a 2001 ford taurus


SEE THE STEPS WITH CAREFULLY AND COMMON SENSE:God bless you
Press the unlock button on your vehicle's key fob to deactivate the alarm. If you've misplaced your remote for the car, use the PATS programmed key to unlock the driver's side door. Then, put the key in the ignition and turn the key to the "on" position. The vehicle's battery should be on, but the engine shouldn't be running.

  • 2 Locate the override button on the alarm box, beneath the driver's side of the dashboard. Press the button and hold it in until the alarm beeps one time. The LED light for the alarm should stop blinking, indicating the anti-theft system is disabled.

  • 3 To reset the vehicle's alarm, put the PATS programmed key in the ignition and turn the key to the "on" position. Press the override button. When the alarm resets, it chirps two times and the LED light begins blinking.



  • 7_25_2012_6_49_12_pm.gif

    Jul 25, 2012 | 2001 Ford Taurus

    1 Answer

    Alarm goes off when opening the locked car with the key.


    do you have 2 key if so try the other one to check if defective chip in key

    Jan 29, 2018 | 2003 Dodge Durango

    2 Answers

    Change oil alarm still flashing after i changed the oil twice


    put the key in the ignition and turn it to the first click, acc. do not start the vehicle, pump the gas pedal 3 times all the way up and down, then turn the key off, after that start the vehicle that should reset the light and alarm. please rate thanks

    Aug 19, 2009 | 2008 Dodge Nitro

    3 Answers

    Key Does Not Work


    It could be that chip inside key just went bad. Do u have a 3rd key? That works? If so take the 2 good keys and turn the igntion to run postion for 3 secs each then do the same for the 3rd key and this will reprogram it if the chip is ok. If you do not have 2 good keys then u will have to have a scan tool that will link up with PATS system and perform security access to reprogram it.

    Feb 12, 2009 | 2005 Ford Taurus

    1 Answer

    Jaguar s/type wont start had flat battery now replaced x.reg 2000


    Yes the key needs to be reprogramed to the car. Unfortunately that will have to be done by the dealer. Make sure that you have plenty of proof that you are the owner. They will reprogram it but you will not take posession of the car until you prove it is yours.

    Dec 26, 2008 | 2000 Jaguar S-Type

    1 Answer

    Imobiliser / alarm system


    immob fitted as standard,coded key so it wont start with wrong key or shorted ignition alarm fitted as standard too,is it controled by an infa red key fob for central locking or just a key

    Oct 15, 2008 | 2002 Volkswagen Golf

    2 Answers

    Electrical


    Go inside the vehicle,dont put key in ignition, leave driver's door open, press the auto lock button on the driver's door, now close door while you are inside and watch on the dash the alarm enable itself, once it stops flashing open the door, this will set off the alarm, lights flashing horn blowing. Now take the key and put it in the drivers door and turn the key to stop the alarm. Now start you vehicle. If you want you can take the glove box apart to get to the vehicle security module to remove it. Dont unplug it unless the vehicle is running (must be running due to back up on computer) unplug the module and you will never have another problem with the security again and it does not effect your powerlocks.

    Jul 09, 2008 | 1995 Jeep Cherokee

    Not finding what you are looking for?
    2004 Chrysler Voyager Logo

    Related Topics:

    28 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chrysler Experts

    Marvin
    Marvin

    Level 3 Expert

    85222 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22485 Answers

    Jonah Oneal

    Level 3 Expert

    14092 Answers

    Are you a Chrysler Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...